Rear Axle Mount for 1987 Mercedes-Benz 300D
Mercedes-Benz With lower control arm joint and wheel mounting,left.
Mercedes-Benz Universal Joint
Left and right. Spring control arm to wheel bearing. Left suspension strut. Wheel carrier. Left spring link.
Mercedes-Benz Parts Kit, Spring Link
Fastening parts to spring link. Mounting parts.
Mercedes-Benz Screw
M14x1.5x90. Spring control arm to wheel bearing left. Spring control arm to wheel bearing m 14x1,5x75.
Mercedes-Benz Nut
Lower control arm to front subframe. Shock absorber to frame. Lower control arm to steering knuckle.
Mercedes-Benz Screw
M12X1.5 X 90
Diameter: 12mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1,5mm. Spring control arm to rear subframe m 12x1,5x90. Spring control arm to rear subframe m12 x 1,5 x 90.
Mercedes-Benz Spring control arm to rear subframe. Upper transverse control arm to steering knuckle. Lower control arm to steering knuckle. Torsion bar to frame. Lower joint to control arm. Joint to steering knuckle. Shock absorber to lower control arm.
Mercedes-Benz Protective plate to spring control arm. Covering to spring control arm. Trim mount to left spring link. Mounting, cover. Guard to left spring link. Cover on spring link and thrust arm. At left side member.
Mercedes-Benz Parts Kit, Tension Strut
Camber struts to wheel bearing. Camber struts to wheel carrier left.
Mercedes-Benz M12x1.5x80. Camber struts to wheel carrier left. Thrust arm to wheel bearing to a 220 350 31 06. Camber struts to wheel bearing m 12x1,5x80.
Mercedes-Benz Refrigerant compressor to support. Bearing cup to bearing bracket.
Mercedes-Benz Steering shock absorber to front axle. Steering shock absorber to drag link and to frame.
Mercedes-Benz Screw
Thrust arm, camber strut and strut on rear subframe. M12x1.5x60. Camber struts to rear subframe. Thrust arm/camber strut/tension rod to rear-axle bracket. Thrust arm to rear subframe.
Mercedes-Benz PIVOT PIN TO FRONT SUBFRAME
Diameter: 12mm
Strength / hardness class: 200 HV
Inside diameter: 13mm
Outside diameter: 20mm
Material thickness: 2mm. CLAMP TO BRACKET
Diameter: 12mm
Strength / hardness class: 200 HV
Inside diameter: 13mm
Outside diameter: 20mm
Material thickness: 2mm.
Mercedes-Benz Repair Kit
Thrust arm to wheel bearing to a 140 350 54 06. Strut to wheel bearing m 12x1,5x77. Strut to wheel bearing m 12 x 1,5.
Mercedes-Benz Repair Kit
Tie rod to rear subframe. For adjusting work only.
Mercedes-Benz Repair size. With eccentric interior bushing. Tie rod to rear subframe. Left and right.
Mercedes-Benz Repair size. Tie rod. With eccentric interior bushing left. For adjusting work only.
Mercedes-Benz M10
Diameter: 10mm
Strength / hardness class: 10
Thread code letter: M
Thread pitch: 1mm
Width across flats: 16mm. Propeller shaft to transmission. Shock absorber to lower control arm m 10x1. Shock absorber to spring control arm m 10x1. Hydropneumatic spring leg to spring control arm m 10. Shock absorber to frame. Hydropneumatic spring leg to rear axle.
Mercedes-Benz M12x1.5. Tie rod to rear subframe. Spring control arm to rear subframe m 12. Bearing cup to bearing bracket. Steering intermediate arm bearing. Drag link to steering arm. Strut to rear subframe.
