Expansion Plugs, Grommets, Plugs, and Sundries for 1987 Mercedes-Benz 300D
Mercedes-Benz In air inlet covering,used for windshield wiper setting opening.
Mercedes-Benz In floor,above rear rear axle d=26 mm. For cover plate. In rear end floor.
Mercedes-Benz In fire wall, right bottom. 42 mm. Passage holes in rear pillars,inside. 42 mm. Summer ventilation. 42 mm. Opening in partition panel,left d=42,0 mm. 42 mm. Outer left rear rear-end floor. 42 MM.
Mercedes-Benz To plug the oblong holes in side members. Rear wheelhouse,outside 32 mm. To plug the hole in front side member end piece. Rear inside left wheelhouse 32 mm. Front and rear side member coverings d=32,5 mm. Rear wheelhouse,inside d=32.0 mm. Wheelhouse, rear left, exterior 32 mm.
Mercedes-Benz Oblong holes in side member. Mounting in transit;at side members rear left and right 43 x 27 mm.
Mercedes-Benz To plug oval holes used for central locking mechanism & window regulator.
Mercedes-Benz Apparatus case. 6.5mm. Paint run-off holes in rear lid 6,5 mm. 6.5mm. Sliding roof hose passage. 6.5mm. To mount warning triangle. 6.5mm. At central inside part below windshield. 6.5mm.
Mercedes-Benz Insulation mounting. 8.5 mm. Rear seat framework. 8.5 mm. Engine cross member 10mm. 8.5 mm. Damping to partition wall rearwall. 8.5 mm. Lining to backrest. 8.5 mm. Tunnel,front. 8.5 mm. At covering. 8.5 mm. To plug the mounting holes in the engine support 10mm. 8.5 mm. Left. 8.5 mm.
Mercedes-Benz Covering to side member 36 x 15 mm. 36x15 mm. In transport mounting reinforcement 36 x 15 mm. 36x15 mm. Cargo securing, at left and right bottom longitudinal member 36 x 15 mm. 36x15 mm. Mounting in transit;at side members, rear left and right only for usa 36 x 15 mm. 36x15 mm. Lashing aperture 36x15 mm. 36x15 mm. Tourist's vehicle 36 mm. 36x15 mm.
Mercedes-Benz Workshop lifting jack take-up device in side member,bottom 28mm. Mount workshop jack in longitudinal member, front left 30mm. Take-up device lock at floor, hard-rubber buffer used for jack 28mm. Workshop vehicle lifter fixture in side member, bottom left 28mm.
Mercedes-Benz For paint run-off hole in spare wheel well 103 mm. Water drain in spare wheel well 103 mm. Floor. Immersion-paint holes. In spare wheel well 100 mm.
Mercedes-Benz Entrance water drain. Left side member,outside. Side member, bottom outside. Inside rear pillar 32 mm. Main floor,left and right 31 mm. Side panel water drain left 32 mm.
Mercedes-Benz Water drain in spare wheel well. Water drain, at spare wheel recess. Water drain in floor,rear right. Rear end floor. Floor water drain,lateral left & right 26 mm.
Mercedes-Benz At tunnel,front floor. Paint run-off holes in floor above rear axle 18,4 - 20,6 mm. Walkman opening.
Mercedes-Benz Rear side member. Only for use with air conditioner. Window crank. In panelling. Plug socket. Fan shroud.
Mercedes-Benz Electric cable thru fire wall. Wheelhouse, front right. At line to vacuum supply tank. Electric cable thru partition panel.
Mercedes-Benz Side member, outside bottom. 32 mm. Door hinge. 32 mm. Left. 32 MM. Paint run-off hole in main floor. 32 mm. Below emergency seat, right. 32 mm. Hole for liquid level indicator in tank. 32 mm.
