Sliding/Lifting Roof Transport Bridge for 1987 Mercedes-Benz 300D

(transport bridge).

At transport bridge,left.

At lifting bow. At bracket. Right. At lifting angle.

Front.

At lifting angle & transport bridge.

At transport bridge.

Lifting angle to transport bridge. On stop.

Screw

Tube to bottom frame. Sliding angle to sliding roof plate. At lifting bow. At transport bridge. Locking clamp to rear end central part. Handle to rear lid.

830 mm. 910 mm. Rear. 900mm.

Drip moulding to lifting angle. Between lifting angle & drip moulding.

Drip moulding 60x15 mm. At transport bridge 5x15 mm.

Frame to reinforcement frame. Front fender to wheelhouse.

Bz6,3x13. Bracket mounting. Control unit to the right of legroom.

Hexagon Head Bolt

Rear lid to hinge lever. Drive to rear pillar. Pipe line to shock absorber leg reinforcement. Strut to front cross member. Bracket to car floor. Cooling pipe to front cross member. Engine hood upper catch to engine hood. Partition panel. Strut to stiffening,front central.

At angle.

(drip moulding).

Seal

830 mm. 910 mm. Rear. 900mm.

810 mm.