Refrigerant Line Arrangement for 1987 Mercedes-Benz 300D
Mercedes-Benz From expansion valve to compressor. Return line thru fire wall. Feed line to fire wall. For fuel hose through wall, spare wheel recess. For starter cable through partition wall. (starter cable through pedal floor). (to seal vacuum connection at ate booster brake). Hose thru fire wall.
Mercedes-Benz Hexagon Head Bolt
Rear lid to hinge lever. Drive to rear pillar. Pipe line to shock absorber leg reinforcement. Strut to front cross member. Bracket to car floor. Cooling pipe to front cross member. Engine hood upper catch to engine hood. Partition panel. Strut to stiffening,front central.
Mercedes-Benz Heater. 7.5X2.0Strength / hardness class: EPDMInside diameter: 7,5mmOutside diameter: 11,5mmMaterial thickness: 2mm. HEATING. 7.5X2.0Strength / hardness class: EPDMInside diameter: 7,5mmOutside diameter: 11,5mmMaterial thickness: 2mm. MOUNTING PLATE TO DRI ...
Mercedes-Benz Fluid-reservoir-to-expansion-valve refrigerant line. For accelerator pedal through front wall. Pedal lever through front panel. Flexible shaft thru fire wall. For flexible drive shaft. At covering. (for suction hose and pressure hose through cowl). Floor water drain,rear right. For pressure hose through front wall.
Mercedes-Benz Front fender to wheelhouse bracket. 4.8x13. Partition panel to fire wall,wheelhouse,connection support,and console. 4.8x13. Mounting, cover. 4.8x13. To 140 470 04 47. 4.8x13. Control unit. 4.8x13. Cooling pipe to side member and to engine cross member. 4.8x13. Line to upper rear wall. 4.8x13. High pressure line to subframe. 4.8x13. Screening below gear lever. 4.8x13. Heat shield mounting. 4.8x13.
Mercedes-Benz At liquid tank. 16 bar. Additional blower. 16 bar. Thermostat to liquid tank. 16 bar.
Mercedes-Benz Pressure switch to liquid tank used for additional blower. 9.0 x 1.8 mm. Pressure switch to liquid tank used for compressor. 9.0 x 1.8 mm. At liquid tank. 9.0 x 1.8 mm. Refrigerant reservoir valve. 9.0 X 1.8 MM. Sensor. 9.0 x 1.8 mm.
Mercedes-Benz Condenser to stiffening and to front cross member. Condenser to front central stiffening and to support,bottom.
Mercedes-Benz Condenser to stiffening and to front cross member. Condenser to front central stiffening and to support,bottom.
Mercedes-Benz Condensed water drain. Compressor-to-condenser refrigerant line to condenser. Starting cable to side member.
Mercedes-Benz Bolt and Washer Assembly
Additional blower to front central stiffening. Bracket to auxiliary fan.
Mercedes-Benz To 140 470 01 47. Bracket to auxiliary blower m 5x12. Bracket to whelhouse flange. Additional blower to condenser.