Axle Housing

Rear axle housing with differential asd 1:2.87.

Less ring gear and pinion.

Less ring gear and pinion.

As required 3,2 mm.

1.6 mm. 1.60 mm.

1.5 mm. 1.50 mm. 1.50 mm as required. 1.50 mm.

1.65 mm.

1.3 mm as required. 1.30 mm.

As required 2,8 mm.

1.25 mm as required. 1.25 mm.

Side Gear

Used without automatic locking differential (asd).

Only used with asd. Rear axle output. Differential gear.

Used without automatic locking differential (asd). Rear axle output.

Less lining. With 5 shackles.

Less lining. With 4 shackles & 2 notches.

1:2.87.

Bolt

Ring gear to differential case. M10x1. Crown gear to differential housing.

3.60 mm. 3.60 mm.

3.80 mm. 3.80 mm.

As required 4.4 mm. 4.40 mm.

4.00 mm. 4.00 mm.

Only used with asd. Ring cylinder. Im sicherungsring kegelrollenlager.

Interior flange.

Right.

Bearing cover to axle housing. Clutch pressure plate to flywheel m8x22. Ring cylinder to rear axle housing m 8x12.

Gasket kit.

Inside right.

Only used with asd. Interior flange.

As required 0.8mm. 0.80 mm.

0.95 mm.

1.15 mm.

As required 1.75 mm. Axle shaft flange to axle housing.

Spacer Washer

As required 1.6mm. 1.60 mm.

As required 2.4 mm. 2.40 mm.

Spacer Washer

As required 1.9 mm. 1.90 mm.

As required 2.3 mm. 2.30 mm.

Pinion bearing. Only used with asd. Drive pinion.

Drive pinion bearing. Outer bevel gear.

Joint flange 90mm. Propeller shaft.

End cover.

M10X25
Diameter: 10mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Console mounting, left. Mount to body. Protective plate to frame m 10x25. Shock absorber to transverse control arm. To 001 542 63 20. Hydropneumatic spring leg to rear axle. Shock absorber to rear axle.

Rear axle housing with differential.