M24x1,5. Oil refilling. For oil drain and oil filler. For oil filler, transmission. (for oil drain and oil filling). (oil filling and oil drain at transmission). For filling in oil or draining off oil resp. At transmission for filling in oil up to transmission 6515822. For oil drain and oil tilling.

As required 2,8 mm.

As required 3,1 mm.

As required 3,4 mm.

Only used with asd. Rear axle output. Differential gear.

Only used with asd.

Less lining. With 5 shackles.

Z=29 i=3.27.

1:3.27.

Bolt

Ring gear to differential case. M10x1. Crown gear to differential housing.

As required 4.4 mm. 4.40 mm.

4.05 mm. 4.05 mm.

4.20 mm. 4.20 mm.

3.60 mm. 3.60 mm.

Only used with asd. Ring cylinder. Im sicherungsring kegelrollenlager.

Left.

Interior flange.

De-aeration valve.

Inside.

1.05 mm.

As required 0.8mm. 0.80 mm.

As required 1.0 mm. 1.00 mm.

0.95 mm.

Spacer Washer

As required 2.0 mm. 2.00 mm.

Spacer Washer

As required 1.6mm. 1.60 mm.

Spacer Washer

As required 1.8mm. 1.80 mm. As required 1.85 mm.

As required 2.3 mm. 2.30 mm.

Drive pinion bearing.

Drive pinion. Pinion bearing. Only used with asd.

Seal Ring

Drive pinion.

Nut

M26X1.5
Diameter: 26mm
Strength / hardness class: ST
Thread code letter: M
Thread pitch: 1,5mm
Outside diameter: 38mm
Width across flats: 30mm. Joint flange to bevel gear. Screw fitting joint flange. Flange to drive pinion. Only used with asd.

Cover to axle housing.