Engine Hood for 1987 Mercedes-Benz 190E
Mercedes-Benz Pipe line to shock absorber leg reinforcement. Pipe line to valve. Hinge lever to engine hood.
Mercedes-Benz Hinge lever to engine hood. Electric change-over valve to unit partition panel.
Mercedes-Benz Hinge lever to cowl. Heater case to fire wall. Stop to interior part. Engine hood hinge to rear wheelhouse. Bumper on fender. Roller blind to rear panel covering, top.
Mercedes-Benz Nut
M6. Bracket to water tank. Mounting parts. Control unit. Bracket mounting. Brake booster assembly to asr bracket. Fuel lines to cowl. Transistorized ignition switchgear to wheelhouse panel. Roller blind to rear panel covering, top.
Mercedes-Benz Repair Kit, Relea. Handle
Handle for engine hood safety hook.
Mercedes-Benz Engine hood release cable to stiffening,front central & lateral left. Engine hood release cable to front panel,bottom. Seal to strut.
Mercedes-Benz (GAS PRESSURE SPRING),ENGINE HOOD,LEFT
Gefahrgutkennzeichen: 2.4 Gas pressure shock absorbers. GAS PRESSURE SPRING TO ENGINE HOOD
Gefahrgutkennzeichen: 2.4 Gas pressure shock absorbers.
Mercedes-Benz Spring strut to body. M8
Diameter: 8mm
Strength / hardness class: 8
Thread code letter: M
Thread pitch: 1,25mm
Outside diameter: 17,9mm
Width across flats: 13mm. Suspension strut to body. Torsion bar on body.
Mercedes-Benz Return 260mm. 10x3.5mm. From return line to pump 420mm. 10x3.5mm. From return line to cooling pipe 360 mm. 10x3.5mm. From steering to pump 280mm. 10x3.5mm. From return line to pump 540 mm. 10x3.5mm. Hose in engine hood sealing,front left " 30 mm ". 10x3.5mm. From steering to cooling pipe 165 mm. 10x3.5mm. From steering to cooling pipe 260mm. 10x3.5mm. (return line),from steering to pump 360 mm. 10x3.5mm.
Mercedes-Benz Left fender 405 mm. At engine hood;for protection of electronic devices behind battery. Left fender 485 mm.
