Rear Springs and Suspension Standard Suspension for 1998 Mercedes-Benz C43 AMG
Mercedes-Benz Upper. stud quantity: 2 (9mm). Top. Stud count: 2 (9mm). As required. Number of burls: 2 (9 mm).
Mercedes-Benz Top. Stud count: 4 (17mm). As required. Number of burls: 4 (17 mm). Upper. stud quantity: 4 ( 17MM).
Mercedes-Benz Upper. stud quantity: 1 (5mm). Top. Stud count: 1 (5mm). As required. Number of burls: 1 (5 mm).
Mercedes-Benz Upper. stud quantity: 3 (13mm). Top. Stud count: 3 (13mm). As required. Number of burls: 3 (13 mm).
Mercedes-Benz
Gefahrgutkennzeichen: 2.4 Gas pressure shock absorbers.
Mercedes-Benz M10X60
Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. Engine mounting to engine support. Pitman arm to steering box assembly. Engine mount to engine carrier. Hydropneumatic spring leg to spring control arm. Shock absorber to lower control arm. Shock absorber to spring control arm.
Mercedes-Benz Hydropneumatic spring leg to spring control arm. Shock absorber to lower control arm m 10x1x60. Shock absorber to spring control arm m 10x1x60. Pitman arm to steering box assembly m10x1x60. Hydropneumatic spring leg to rear axle.
Mercedes-Benz Refrigerant compressor to support. Bearing cup to bearing bracket.
Mercedes-Benz M10
Diameter: 10mm
Strength / hardness class: 10
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 16mm. Rod to torsion bar. Shock absorber to frame. Trailer coupling to bracket. Camber struts to wheel bearing m 10. Shock absorber to spring control arm m 10. Axle housing to rear subframe. Tie rod to wheel bearing m10.
Mercedes-Benz M10
Diameter: 10mm
Strength / hardness class: 10
Thread code letter: M
Thread pitch: 1mm
Width across flats: 16mm. Propeller shaft to transmission. Shock absorber to lower control arm m 10x1. Shock absorber to spring control arm m 10x1. Hydropneumatic spring leg to spring control arm m 10. Shock absorber to frame. Hydropneumatic spring leg to rear axle.
Mercedes-Benz Bumper to body. Shock absorber to frame. Hydropneumatic spring leg to frame.
Mercedes-Benz Shock absorber to frame. Bumper to body. Hydropneumatic spring leg to frame. Shock absorber to rear axle.
Mercedes-Benz M10X1
Diameter: 10mm
Strength / hardness class: 8
Thread code letter: M
Thread pitch: 1mm
Width across flats: 16mm. Front shock absorbers to frame. Bumper to body. Shock absorber to frame m 10x1. Hydropneumatic spring leg to frame m 10x1.
Mercedes-Benz Shock absorber mounting,front. Shock absorber mounting,rear. Hydropneumatic spring leg mounting.