Refrigerant Line Arrangement for 1998 Mercedes-Benz C43 AMG
Mercedes-Benz Heater. 7.5X2.0Strength / hardness class: EPDMInside diameter: 7,5mmOutside diameter: 11,5mmMaterial thickness: 2mm. HEATING. 7.5X2.0Strength / hardness class: EPDMInside diameter: 7,5mmOutside diameter: 11,5mmMaterial thickness: 2mm. MOUNTING PLATE TO DRI ...
Mercedes-Benz Tube to rear pillar. Hose to right rear pillar. Main cable harness to fire wall.
Mercedes-Benz Radiator grille shell to engine hood. Covering to body.
Mercedes-Benz Cutoff Valve
Test connection. De-aeration valve. Filling valve. In suction line.
Mercedes-Benz M8X30-10.9
Diameter: 8mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. Steering coupling to steering shaft. Line to compressor. Stop buffer to frame. Plug connection, separation point.
Mercedes-Benz Pressure switch to liquid tank used for additional blower. 9.0 x 1.8 mm. Pressure switch to liquid tank used for compressor. 9.0 x 1.8 mm. At liquid tank. 9.0 x 1.8 mm. Refrigerant reservoir valve. 9.0 X 1.8 MM. Sensor. 9.0 x 1.8 mm.
Mercedes-Benz M5x10.5. At blower;temperature sensor ventilation. Bracket to fire wall. Heat shield mounting. Control unit. Screening plates. Main floor,front right. Return line to partition panel.
Mercedes-Benz Valve
Condenser. To 140 830 05 70. To 129 830 02 70,129 830 04 70. Filling valve. In pressure line.
Mercedes-Benz Between condenser and radiator,top 112 mm. Between condenser and radiator,top 350 mm.
Mercedes-Benz Screw
Tube to bottom frame. Sliding angle to sliding roof plate. At lifting bow. At transport bridge. Locking clamp to rear end central part. Handle to rear lid.
Mercedes-Benz Additional blower to condenser. Condenser to radiator.
