Rear Axle Housing with Differential for 1998 Mercedes-Benz C43 AMG

Axle Housing

Rear axle housing with differential, automatic five-speed transmission 1:3.07 (C43 AMG). 1:3.07.

M 24x1.5. Oil drain screw. .. Drain screw, rear axle differential. Filling and drain screw. Oil refilling. Housing. Left and right.

Less ring gear and pinion c 43 amg.

1.45 mm.

1.4 mm. 1.40 mm. 1.40 mm as required. 1.40 mm.

1.65 mm.

1.6 mm. 1.60 mm.

1.3 mm as required. 1.30 mm.

Side Gear

Used without automatic locking differential (asd).

Rear axle output.

6X45 MM
Diameter: 6mm.

Z=31.

Ring gear bearing.

As required 3.80 mm. 3.80 mm.

As required 4.20 mm. 4.20 mm.

As required 4.10 mm. 4.10 mm.

As required 4.15 mm. 4.15 mm.

As required 3.95 mm. 3.95 mm.

As required 4.45 mm. 4.45 mm.

As required 3.70 mm. 3.70 mm.

As required 4.30 mm. 4.30 mm.

Seal Ring

Left and right drive shaft
Inside diameter: 45mm
Outside diameter: 116mm. INTERIOR FLANGE
Inside diameter: 45mm
Outside diameter: 116mm. LEFT AND RIGHT AXLE SHAFT
Inside diameter: 45mm
Outside diameter: 116mm. Inner flange
Inside diameter: 45mm
Outside diameter: 116mm.

Inside.

As required 1.65 mm. 1.65 mm.

As required 1.90 mm. 1.90 mm.

As required 1.60 mm. 1.60 mm.

As required 2.05 mm. 2.05 mm.

As required 1.30 mm. 1.30 mm.

As required 1.40 mm. 1.40 mm.

As required 1.75 mm. 1.75 mm.

As required 1.80 mm. 1.80 mm.

As required 1.70 mm. 1.70 mm.

As required 2.35 mm. 2.35 mm.

As required 2.30 mm. 2.30 mm.

As required 2.00 mm. 2.00 mm.

As required 1,80 mm.

As required 2.35 mm (c 36 amg).

As required 1,50 mm.

As required 2,15 mm.

As required 2,05 mm.

As required 1,70 mm.

As required 2,30 mm.

As required 2,25 mm.

As required 2,10 mm.

Drive pinion.

Drive pinion. Pinion bearing.

Drive pinion.

Nut

M29X1.5
Diameter: 29mm
Strength / hardness class: ST
Thread code letter: M
Thread pitch: 1,5mm
Outside diameter: 48mm
Width across flats: 41mm. Screw fitting joint flange. Flange to drive pinion. E63. C300, C300 4-matic. Manual trans. Joint flange to crown gear. Joint flange threaded connection. Joint flange to bevel gear.

Hexalobular Screw

Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 16mm.

Rear axle housing with differential.