Seal Ring

Heater. 7.5X2.0Strength / hardness class: EPDMInside diameter: 7,5mmOutside diameter: 11,5mmMaterial thickness: 2mm. HEATING. 7.5X2.0Strength / hardness class: EPDMInside diameter: 7,5mmOutside diameter: 11,5mmMaterial thickness: 2mm. MOUNTING PLATE TO DRI ...

Evaporator.

4MM. 4.0mm2. Fan. 4.0mm2. TO 008 545 10 28. 4.0mm2.

Front fender to wheelhouse bracket. 4.8x13. Partition panel to fire wall,wheelhouse,connection support,and console. 4.8x13. Mounting, cover. 4.8x13. To 140 470 04 47. 4.8x13. Control unit. 4.8x13. Cooling pipe to side member and to engine cross member. 4.8x13. Line to upper rear wall. 4.8x13. High pressure line to subframe. 4.8x13. Screening below gear lever. 4.8x13. Heat shield mounting. 4.8x13.

Seal Ring

Pressure switch to liquid tank used for additional blower. 9.0 x 1.8 mm. Pressure switch to liquid tank used for compressor. 9.0 x 1.8 mm. At liquid tank. 9.0 x 1.8 mm. Refrigerant reservoir valve. 9.0 X 1.8 MM. Sensor. 9.0 x 1.8 mm.

From condenser to liquid tank.

At condenser,lateral.

Condenser to stiffening and to front cross member. Condenser to front central stiffening and to support,bottom.

Clamp

Line attachment. 12/15.

Additional blower to front central stiffening.

Bolt and Washer Assembly

Additional blower to front central stiffening. Bracket to auxiliary fan.

Screw

LEFT GRAB HANDLE MOUNTING
Diameter: 5mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm.

Bracket to auxiliary blower.

To 140 470 01 47. Bracket to auxiliary blower m 5x12. Bracket to whelhouse flange. Additional blower to condenser.

Additional blower to front central stiffening. Bracket to cross member.

Coolant line to connection fitting. Spacer. To hose. From engine to heat exchanger. Protection against scoring. Filling hose. To oil line. Feed line. Molded hose.

Round-Sect. Sealing Ring

Pipeline. 17x2 mm.

Refrigerant line thru fire wall.

Hose to suction line.

Adapter cable. 9x249mm. Bracket. 9x249mm.

On delivery side r12-->r134a.

On suction side r12-->r134a.