Instrument panel to front panel pillar. M6x16-8.8. Foot operated parking brake to bracket. Hydraulic unit to bracket. Screening to partition panel.

Refrigerant compressor to support. Bearing cup to bearing bracket.

For selector rod and shifting rod. 2,0x14. Engine hood support to support. 2,0x14. Clamping bolt to compensating lever. 2,0x14.

M5. Clamp to bracket. Latch-type lock to rear lid. Rods to linkage. Sliding angle to sliding roof plate. Window regulator rails and retaining rails to glass panes. Engine hood release cable to front panel,bottom. Cable to fuel pump. Ventilator windows to doors, top.

Rear brake cable to bracket.

Pipe line to shock absorber leg reinforcement. Pipe line to valve. Hinge lever to engine hood.

Screw

Engine hood upper catch to engine hood. Flap to hinge m 6x10.

Instrument panel to front panel pillar. Pistol-grip hand brake to front panel pillar. Instrument panel to bracket. Instrument panel to frame. Door plate,rear.

3.6 X 145 MM
Diameter: -
Inside diameter: 1,5mm
Outside diameter: 33mm
Material thickness: 1,3mm.

Front.

Condensed water drain. Compressor-to-condenser refrigerant line to condenser. Starting cable to side member.

Brake cable to rear floor.

Shackle mounting. M8X30
Diameter: 8mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. At support. Instrument panel to left / right A-pillar and wind deflector M 8X30. Seat framework to backrest. Child's seat mounting. Child seat safety catch. Left and right outer guard plate to rear panel. Rear m8x30. Crossmember to a-pillar.

Front brake cable to parking brake.

Rear left.

Brake cable to rear axle. Oxygen sensor plug connection to main floor.