Rear Axle Housing with Differential for 1992 Mercedes-Benz 300SE

Rear axle housing with differential abs 1:3.46.

M24x1,5. Oil refilling. For oil drain and oil filler. For oil filler, transmission. (for oil drain and oil filling). (oil filling and oil drain at transmission). For filling in oil or draining off oil resp. At transmission for filling in oil up to transmission 6515822. For oil drain and oil tilling.

1.65 mm.

1.25 mm as required. 1.25 mm.

1.35 mm.

1.3 mm as required. 1.30 mm.

1.55 mm.

Only used with asd. Rear axle output. Differential gear.

Used without automatic locking differential (asd). Rear axle output.

Ring Gear and Pinion

1:3.46.

Bolt

Ring gear to differential case. M10x1. Crown gear to differential housing.

3.85 mm. 3.85 mm.

4.20 mm. 4.20 mm.

3.60 mm. 3.60 mm.

As required 4.4 mm. 4.40 mm.

4.10 mm. 4.10 mm.

4.15 mm. 4.15 mm.

4.30 mm. 4.30 mm.

Seal Ring

Interior flange.

As required 1.4 mm. 1.40 mm.

As required 1.5mm. 1.50 mm.

As required 0.9 mm. 0.90 mm.

1.10 mm.

As required 1.75 mm. Axle shaft flange to axle housing.

As required 2.1 mm. 2.10 mm.

As required 1.6mm. 1.60 mm.

1.65 mm.

Spacer Washer

As required 1.9 mm. 1.90 mm.

2.25 mm.

As required 1.7 mm. 1.70 mm.

Pinion bearing. Only used with asd. Drive pinion.

Drive pinion bearing. Outer bevel gear.

Seal Ring

Drive pinion.

Drive pinion. Joint flange.

Cover to axle housing.

OIL DRAIN, PORTAL AXLE LH
Strength / hardness class: AL
Inside diameter: 24mm
Outside diameter: 29mm
Material thickness: 2mm. To left housing
Strength / hardness class: AL
Inside diameter: 24mm
Outside diameter: 29mm
Material thickness: 2mm. To left portal transmission
Strength / hardness class: AL
Inside diameter: 24mm
Outside diameter: 29mm
Material thickness: 2mm.