4MATIC® Steering Knuckle & Control Arm for 2019 Mercedes-Benz Maybach S560
Mercedes-Benz M16X60
Diameter: 16mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm. Propeller shaft to flange. Propeller shaft to front wheel hub, left. Drive shaft to flange. Drive shaft to front wheel hub. Left axle shaft.
Mercedes-Benz Left, adjustable bearing. Right, adjustable bearing.
Mercedes-Benz Left and right. Spring control arm to wheel bearing. Left suspension strut. Wheel carrier. Left spring link.
Mercedes-Benz Spring link to integral carrier, left. M14X1,5X130
Diameter: 14mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm. Left and right. Trans. Con. Arm left. Bottom on frame.
Mercedes-Benz M14X1.5
Diameter: 14mm
Strength / hardness class: 10
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 21mm. Strut rod to integral carrier. Cross strut to integral carrier. Transverse control arm to left steering knuckle. Torque strut to frame-type int. Supp.. Lower transverse control arm to left wheel carrier.
Mercedes-Benz Lower control arm to steering knuckle, left. M16. Transverse control arm at left wheel carrier.
Mercedes-Benz Upper transverse control arm to left steering knuckle. M10X60-10.9
Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. Shock absorber to rear axle. Mounting, lower shock absorber. Cross member, top, at steering knuckle, left. Mount, reinforcement to tunnel. Cross strut mount. Engine mount to left and right engine carrier. Mass damper and engine mount to left engine carrier.
Mercedes-Benz Upper left transverse control arm to body. M12X1,5X95
Diameter: 12mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm. Axle housing on rear axle carrier, front. Camber struts to wheel carrier. Transmission to subframe m12x1,5x95. Axle housing to rear subframe. Axle housing to rear axle carrier, rear. Torsion bar to rear axle carrier. Vibration absorber.
