Front bottom left.

Console left.

Parts Kit, Longit. Member

Left.

Gas-filled strut at left to engine hood. On spring dome,right. Right wheel well. To left holder. Ball stud, gas-filled strut, left, engine hood. Pneumatic spring. Gas pressure spring to engine hood. Left longitudinal member. Right wheelhouse. Left and right.

Left.

Crossmember

Left pedal floor panel.

Front right.

Rear bottom right.

Right.

Parts Kit, Longit. Member

Right.

Right gas-operated strut.

Frame-type int. Support. M10. Front cross member.

Frame-type integral support, left.

BEARING TO REAR AXLE
Diameter: 15mm
Inside diameter: 15mm
Outside diameter: 50mm
Material thickness: 2mm. INTEGRAL CARRIER TO LONGITUDINAL MEMBER, FRONT
Diameter: 15mm
Inside diameter: 15mm
Outside diameter: 50mm
Material thickness: 2mm. DIFFERENTIAL TO CROSS STABILIZER FRONT
Diameter: 15mm
Inside diameter: 15mm
Outside diameter: 50mm
Material thickness: 2mm.

Integral carrier at longitudinal member, center. Front frame-type integral support.

Rear right.

Steering gear to integral carrierDiameter: 12mmStrength / hardness class: 10.9Thread code letter: MThread pitch: 1,5mm. Wheel bearing to left steering knuckle, upper M12X1.5X70Diameter: 12mmStrength / hardness class: 10.9Thread code letter: MThread pitch: ...

Console to side member left. M12x1,5x43.

Steering to frame-type integral support.

Repair solution for broken weld stud. (parts kit),line mounting. (parts kit) on left and right wheelhouses. Fuel and brake lines to main floor, left. Wheelhouse covering. Repair solution for ruptured welded pins menge nach bedarf.