Left.

Right.

Under right main floor.

Under right main floor.

Main floor, right. Right reinforcement.

Right trim to body
Diameter: 7,2mm. Cover mount
Diameter: 7,2mm. Cover to left bumper
Diameter: 7,2mm. Left lateral support to trim
Diameter: 7,2mm. Left trim to body
Diameter: 7,2mm. Befestigung seitenfuehrung links und rechts
diameter: 7,2mm. Coolant line mount
Diameter: 7,2mm. Left and right absorber mount
Diameter: 7,2mm. Left and right support
Diameter: 7,2mm. To air ducting
Diameter: 7,2mm.

Cover to left main floor. Mount, wheel arch liner, left. Wheel arch liner to bodyshell, front axle, front left. Cover to left rear-end floor. Rear holder mount.

To body. Underbody left.

Hex. Head Tapping Screw

Right side. Lateral right.

Below main floor,right.

Right front main floor.

Main floor,front left.

Crossmember, Driver Seat

Under driver's seat, right front.

Crossmember, Driver Seat

Under driver's seat, right front. Below front seat,front right.

Crossmember, Driver Seat

Under driver's seat, right rear. Below front seat,rear right.

Crossmember, Driver Seat

Under driver's seat, right rear.

Reinforcement to right tunnel. Reinforcement at tunnel, right.

Rear lid to hinge lever. Drive to rear pillar. Pipe line to shock absorber leg reinforcement. Strut to front cross member. Bracket to car floor. Cooling pipe to front cross member. Engine hood upper catch to engine hood. Partition panel. Strut to stiffening,front central.

M10X40
Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm. Reinforcement to tunnel at center. Assembly frame mount. Stiffener to tunnel.

Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 16mm.

Reinforcement at tunnel, right. Reinforcement to right tunnel.

Reinforcement at tunnel, left.