Rear lid to hinge lever. Drive to rear pillar. Pipe line to shock absorber leg reinforcement. Strut to front cross member. Bracket to car floor. Cooling pipe to front cross member. Engine hood upper catch to engine hood. Partition panel. Strut to stiffening,front central.

Charging socket mount. M5x18. Mounting, charge socket.

Actuator. Charging socket. Charging cable.

For standard socket 4m/5m. Charger, high-voltage battery. Charging cable, Mode 2 / 3.

For standard socket.

For standard socket 4M.

For standard socket 8m. Charger, high-voltage battery. Charging cable, Mode 2 / 3.

Charging cable. For standard socket 4M.

For standard socket 8M.

For charging column or wallbox charging station. For standard socket. For camping socket. Charging cable for Type 2 wallbox and public charging stations (Mode 3, 3-phase), 32 A, 22 kW, 4 m, straight. For charging station or wallbox 3700 mm.

For standard socket. For charging column or wallbox charging station 8m.

Pouch, charging cable, high-voltage battery.

For charging cable.

To pocket. Pocket mount. Charging cable.

Cover to left main floor. Mount, wheel arch liner, left. Wheel arch liner to bodyshell, front axle, front left. Cover to left rear-end floor. Rear holder mount.

Oil filler pipe to transmission. Oil line left to oil pan. Starting cable to engine. High pressure expansion hose to oil pan.

Holder, control unit.

Holder, control unit.

Holder, control unit.

M6x15.

Cable duct to transmission
Diameter: 6mm
Strength / hardness class: AL9
Thread code letter: M
Thread pitch: 1mm.

Carrier fastening. M6X30
Diameter: 6mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. Left tail lamp mount. Left and right. Tunnel center.