Steering Knuckle and Control Arm for 2016 Mercedes-Benz CLA 250
Mercedes-Benz Front wheel hub, outer. Wheel hub, left and right. To left steering knuckle, front axle.
Mercedes-Benz Comfort bearing to transverse control arm, left. M14x1,5x94. Comfort bearing on transverse control arm, left.
Mercedes-Benz M10x28. Querlenker an laengstraeger links. Bearing element to longitudinal member, left.
Mercedes-Benz Rear axle differential to carrier, front. M14x1,5. Axle housing on rear axle carrier, front. Axle housing at rear axle carrier, front. Torque strut at steering knuckle, left. Suspension strut to left and right steering knuckle. Transverse control arm to left steering knuckle. Lower control arm to steering knuckle, left. Rear axle differential to cross member. Tie rod to wheel bearing left.
Mercedes-Benz Transverse control arm to left steering knuckle. M14X1,5
Diameter: 14mm
Strength / hardness class: 10
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 21mm.
Mercedes-Benz M14X1.5
Diameter: 14mm
Strength / hardness class: 10
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 21mm. Strut rod to integral carrier. Cross strut to integral carrier. Transverse control arm to left steering knuckle. Torque strut to frame-type int. Supp.. Lower transverse control arm to left wheel carrier.
Mercedes-Benz M10x100. Transverse control arm to integral carrier, left. Bearing element to integral carrier, left.
Mercedes-Benz Bearing to integral carrier, left. M14x1,5x125. Transverse control arm to integral carrier, left.
