No.
Part # / Description / Price
29
Screw Plug
Mercedes-Benz M24x1,5. Oil refilling. For oil drain and oil filler. For oil filler, transmission. (for oil drain and oil filling). (oil filling and oil drain at transmission). For filling in oil or draining off oil resp. At transmission for filling in oil up to transmission 6515822. For oil drain and oil tilling.
32
Stud Bolt
Mercedes-Benz Axle housing to rear subframe.
38
Thrust Plate
Mercedes-Benz As required 1.6mm. As required 1.60 mm.
38
Thrust Plate
Mercedes-Benz As required 1.3 mm. As required 1.30 mm.
38
Thrust Plate
Mercedes-Benz As required 1.40 mm. As required 1.4 mm.
38
Thrust Plate
Mercedes-Benz As required 1.7 mm. As required 1.70 mm.
38
Thrust Plate
Mercedes-Benz As required 1.5mm. As required 1.50 mm.
59
Pin
Mercedes-Benz 80
Shim
Mercedes-Benz As required 1.5mm. As required 1.50. 1.50 mm.
80
Shim
Mercedes-Benz Spacer Washer
As required 1.4 mm. 1.40 mm.
80
Shim
Mercedes-Benz As required 1.1 mm. 1.10 mm.
86
Sealing Ring Mercedes-Benz Bearing cover to axle housing. Inner joint. Outer left.
92
Sealing Ring Mercedes-Benz Seal Ring
Axle shaft. Interior flange.
101
Flange
Mercedes-Benz Inside. Axle shaft to axle housing.
110
Spacer Washer
Mercedes-Benz As required 2.7 mm. 2.70 mm as required.
116
Snap Ring Mercedes-Benz As required 1.75 mm. Axle shaft flange to axle housing.
119
Shim
Mercedes-Benz Spacer Washer
As required 2.4 mm. 2.40 mm.
119
Shim
Mercedes-Benz Spacer Washer
As required 1.6mm. 1.60 mm.
119
Shim
Mercedes-Benz As required 2.0 mm. 2.00 mm.
119
Shim
Mercedes-Benz As required 1.9 mm. 1.90 mm.
119
Shim
Mercedes-Benz Spacer Washer
As required 1.8mm. 1.80 mm. As required 1.85 mm.
119
Shim
Mercedes-Benz As required 1.7 mm. 1.70 mm.
125
Spacer Bush Mercedes-Benz Pinion bearing. Only used with asd. Drive pinion.
128
Friction Washer Mercedes-Benz Drive pinion. Pinion bearing. Only used with asd.
140
Flange
Mercedes-Benz Joint flange 90mm. Propeller shaft.
143
Collar Nut, Ra Transmission Mercedes-Benz Nut
M26X1.5
Diameter: 26mm
Strength / hardness class: ST
Thread code letter: M
Thread pitch: 1,5mm
Outside diameter: 38mm
Width across flats: 30mm. Joint flange to bevel gear. Screw fitting joint flange. Flange to drive pinion. Only used with asd.
146
Cap
Mercedes-Benz 158
Hexagon Head Bolt Mercedes-Benz Fastening, spare wheel well. M10X20
Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. Hinge to door wing. Engine rear support to floor. Cover to axle housing.
167
Sealing Ring Mercedes-Benz OIL DRAIN, PORTAL AXLE LH
Strength / hardness class: AL
Inside diameter: 24mm
Outside diameter: 29mm
Material thickness: 2mm. To left housing
Strength / hardness class: AL
Inside diameter: 24mm
Outside diameter: 29mm
Material thickness: 2mm. To left portal transmission
Strength / hardness class: AL
Inside diameter: 24mm
Outside diameter: 29mm
Material thickness: 2mm.
173
Breather Mercedes-Benz Rear axle housing with differential. M 14 x 1,5. Differential gear. Right m 14x1,5.
176
Holder
Mercedes-Benz Repair Kit, Rr Axle Shaft
Rubber mounting to frame floor unit.
1 This price excludes a refundable manufacturer's core charge. Add the part to your cart to see the core charge.
