Expansion Tank, Mounting and Hoses for 1984 Mercedes-Benz 380SE
Mercedes-Benz Clamp
GROUND CABLE TO SIDE MEMBER. 45-55 MMInside diameter: 45mmOutside diameter: 55mmMaterial thickness: 1mmWidth across flats: 7. BETWEEN ENGINE, HOUSING AND RADIATOR. 45-55 MMInside diameter: 45mmOutside diameter: 55mmMaterial thickness: 1mmWidth across flats ...
Mercedes-Benz FROM EXPANSION TANK TO ENGINE 1200 MM. 8X15 MMInside diameter: 8mmOutside diameter: 15mmMaterial thickness: 3,5mm. FROM EXPANSION TANK TO ENGINE 1575 MM. 8X15 MMInside diameter: 8mmOutside diameter: 15mmMaterial thickness: 3,5mm. FROM EXPANSION TANK TO RAD ...
Mercedes-Benz Radiator/engine/expansion-tank de-aeration lines. Breather line between radiator and expansion tank.
Mercedes-Benz Cooling water hose to radiator. 23-30 mm. Fuel hose. 23-30 mm. From oil tank to pump. 23-30 mm. Hose to water valve 20-30 mm. 23-30 mm. Filling hose to radiator. 23-30 mm. From engine to heat exchanger l 23-30. 23-30 mm.
Mercedes-Benz Bracket to wheel arch panel. Compressor-to-condenser refrigerant line to side member. Main cable harness to left cross member at instrument panel. From expansion tank to radiator.
Mercedes-Benz Parts kit to 1245000649. Parts kit to 126 500 15 49. Parts kit to 1265001549.
Mercedes-Benz TO 1265001549. 30X1.5X7
Inside diameter: 30mm
Material thickness: 1,5mm. DRIVE SHAFT. 30X1.5X7
Inside diameter: 30mm
Material thickness: 1,5mm. TO 126 500 15 49. 30X1.5X7
Inside diameter: 30mm
Material thickness: 1,5mm.
Mercedes-Benz 810 mm. 6,5x3,5 mm. Breather 300 mm. 6,5x3,5 mm. De-aeration line to expansion tank. 6,5x3,5 mm. Expansion tank 300 mm. 6,5x3,5 mm.
Mercedes-Benz Screw
Cover on bumper. 4,8X19
Diameter: 4,8mm
Thread code letter: R.
Mercedes-Benz Control unit to bracket. Kevlar fibre plates on door outer panel. Bracket to seat height adjustment. Ground connection to bracket.
Mercedes-Benz Front fender to wheelhouse bracket. 4.8x13. Partition panel to fire wall,wheelhouse,connection support,and console. 4.8x13. Mounting, cover. 4.8x13. To 140 470 04 47. 4.8x13. Control unit. 4.8x13. Cooling pipe to side member and to engine cross member. 4.8x13. Line to upper rear wall. 4.8x13. High pressure line to subframe. 4.8x13. Screening below gear lever. 4.8x13. Heat shield mounting. 4.8x13.
Mercedes-Benz 160 mm. 13.3x3 mm. From fuel filter to feed line. 13.3x3 mm. 300 mm. 13.3x3 mm. 110mm. 13.3x3 mm. Order by the meter. 13.3x3 mm. 250 mm. 13.3x3 mm. From activated charcoal filter to regeneration valve. 13.3x3 mm. 100 mm from fuel return line to fuel tark. 13.3x3 mm.
Mercedes-Benz Cable inlet. Evaporator-to-compressor refrigerant line. Hose guide to rear subframe. Line passage to bracket. From expansion valve to compressor. Fuel hose to cross member.
