Crossmember Under Seat

Crossmember under rear seat.

Left.

Seats, rear passenger compartment, rear-end floor.

Rear floor.

Outer left Isofix.

Crossmember

Lower part over rear axle.

Rear end floor. Emergency spare wheel mount. Fastening, spare tire and speaker. Spare wheel carrier.

Left.

Left.

Left.

Pressure sensor. Line to longitudinal member. Piping mount. Left and right inner longitudinal member. Mounting to connecting member. Refrigerant line to suspension strut tower. Line mount. To cover. Right rear longitudinal member, upper. Line to connecting member.

Right.

Clip fastening. Child seat fastening isofix inner left/right. Bracket mounting left & right.

Left.

Right.

Right.

Differential pressure sensor. M6X25
Diameter: 6mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Roller blind. Left sensor mount. Pressure sensor to holder. Screwith bolt, armrest/stowage compartment, rear passenger compartment. Mount, sensor to holder. Screw, exhaust pressure sensor.

Holder to rear panel crossmember. M8
Diameter: 8mm
Strength / hardness class: 10
Thread code letter: M
Thread pitch: 1,25mm
Outside diameter: 17,9mm
Width across flats: 13mm. Fastening, guard plate. Guard plate at upper left. Mounting of carrier. Hinge to roof frame. Steering joint to steering gear and to steering shaft. Left and right mounting supports to rear axle reinforcement. Right strut fastening. To conduit.

Plate on door.

Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 16mm.

Hexalobular Screw

Hinges & hardware. Rails & components. Handles & locks, passenger side door.

Battery holder to longitudinal member. M10X80
Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. Crossmember to longitudinal member. Left holder to integral carrier.

Hexalobular Screw

M8X25
Diameter: 8mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. To door. Hinges & hardware, to body. Left front diagonal strut. Screw, reinforcement, left, strut, crossmember, rear axle, rear-end floor inner. Steering column attachment. Mount, tensioning strap, right front. Reinforcing tube to rear-end center section.

Spare wheel well.

Left front rocker panel. Left side member. Side sill, left. Load compartment well.

M8x25-8.8. Fuel tank to console. Bracket to mounting plate or to transmission. Bracket to bumper. Shackle to torsion bar. Intermediate bearing to frame.

To right load compartment well.

Battery carrier.

Crossmember

Crossmember, rear.

Hex. Nut W Flange + Piece

Crossmember to left and right longitudinal member. M10
Diameter: 10mm
Strength / hardness class: 10
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 16mm. Flange. Left and right rear crossmember mount. Left and right reinforcement mount. Nut, mount, protective plate, crossmember, rear. Mount, rear end crossmember to body-in-white. Reinforcement to left and right longitudinal member.

M12x1.5x47. Left trailer hitch. Left support. Reinforcement to longitudinal member lh and rh. Screw, reinforcement, longitudinal member, rear end.

Right.

For hinge. Hinge to front door.

Left and right.

Fastening, strut to frame and bracket. Strut to frame-type integral support. Fastening, rear strut. Strut to integral carrier at center. Left and right support mount. Backrest attachment. Front strut to integral carrier and longitudinal member. Backrest to seat cushion. Screw, cross strut, suspension strut tower. Mount, left and right strut.

Left strut.

Rear-end floor.

Spring Nut