Steering Knuckle and Transverse Control Arm for 2024 Mercedes-Benz SL43 AMG

Steering knuckle, right.

Steering knuckle, right.

Left rear wheel bearing to wheel carrier. Left and right wheel bearing to steering knuckle.

Left spring link to integral carrier
Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. Spring link to left rear axle carrier
Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm.

Left spring link to integral carrier. 8 MM. Spring link to left rear axle carrier. 8 MM.

Left spring link to integral carrier. 1 MM. Spring link to left rear axle carrier. 1 MM.

Left spring link to integral carrier. 2 MM. Spring link to left rear axle carrier. 2 MM.

Spring link to steering knuckle, left.

Left.

Left thrust arm to integral carrier. 4 MM.

Left thrust arm to integral carrier. 3 MM.

Left thrust arm to integral carrier. 6 MM.

Shock absorber to spring control arm. M16
Diameter: 16mm
Strength / hardness class: 10
Thread code letter: M
Thread pitch: 1,5mm
Outside diameter: 34,5mm
Width across flats: 24mm. Spring link to steering knuckle, left. Shock absorber mount, lower left. Transverse control arm to frame. Thrust arm to left steering knuckle. Left spring link to integral carrier. Spring link to left wheel carrier. Suspension strut to left and right spring link.

Left.

Mount, left cover. M10X50
Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. Cross member to tunnel. Left tension strut to longitudinal member, front in direction of travel. Camber strut to longitudinal member, left. Front cover to body-in-white, right. Left load compartment floor mount.

Right.