Right.

Holder to body-in-white. Center reinforcement to reinforcing tube. To carrier. Trim mount. Armrest to rear panel. Mount, latch lower part to reinforcement. Mount filler neck. Integral carrier fastening. Mounting, cover.

Rear lid to hinge lever. Drive to rear pillar. Pipe line to shock absorber leg reinforcement. Strut to front cross member. Bracket to car floor. Cooling pipe to front cross member. Engine hood upper catch to engine hood. Partition panel. Strut to stiffening,front central.

M8x25-8.8. Fuel tank to console. Bracket to mounting plate or to transmission. Bracket to bumper. Shackle to torsion bar. Intermediate bearing to frame.

Hexalobular Screw

6 x 16mm.

Hexagon Head Bolt

Spring loaded type. Left and right impact absorber to crossmember on outside
Diameter: 12mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm. Left and right absorber mount to crossmember
Diameter: 12mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm. Type 2.

Left impact absorber to longitudinal member. M12x107. Bearing bracket to rear axle carrier.

Left lower impact absorber to mounting console. M8X80
Diameter: 8mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Jacket tube to front crossmember. Front actuator mount. Actuator to transmission housing. Screw, mount, mounting support, crossmember, front.

Shield to transmission housing. M8X20
Diameter: 8mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. Rear seat, left. Lower left and right absorber to front support. Left and right absorber mount. Left and right retaining bracket mount. Lower absorber to left and right integral carrier. Screwith bolt, mount, support, crash box.

Left lower.

M8X30
Diameter: 8mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Battery mount. Left and right support mount. Fastening, guard plate. Left and right support to crossmember. Side wall mount. Screwith bolt, mount, strut, crash box, crossmember, front. Hinge, left and right m6x16.

Right lower.

Left side crossmember to lower crossmember. M6X45
Diameter: 6mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm.

M8x55. Lower crossmember mount. Crossmember to firewall. Wiper system mount to firewall. Lower left and right bracing mount.

Support to crossmemberDiameter: 6mmStrength / hardness class: 8.8Thread code letter: MThread pitch: 1mm. Left mounting support to load compartment floorDiameter: 6mmStrength / hardness class: 8.8Thread code letter: MThread pitch: 1mm. FASTENING, FRONT ROLL ...

Left.

To reinforcement at left and right. To crossmember. Left and right lower part. Left and right hood. Bottom. Latch, lower part, hood catch.

Left latch/plug. Engine hood catch, left. Engine hood latch, driver side. Hood catch right. Right limit switch. Contact switch, hood catch, left. Engine hood contact for anti-theft alarm system. Left limit switch.