Right.

M12X1,5
Diameter: 12mm
Strength / hardness class: 10
Thread code letter: M
Thread pitch: 1,5mm
Outside diameter: 32mm
Width across flats: 18mm. Stabilizer bar linkage to steering knuckle. Torsion bar linkage mount. On left longitudinal member. Steering gear to frame. Torsion bar linkage to steering knuckle. Nut, outer, rear axle carrier, mounting support, drive unit, rear. Bearing bracket to rear axle carrier. Mount, strut to shock-absorber strut tower, left and right.

Elast. Fit. Trailer Hitch

Right. Trailer hitch connector.

Right lower.

Cooler to thermostat.

Right.

Right.

Right.

Right.

Center.

Left front door control unit.

Right.

Right wheel arch cooler. Radiator.

Left lower.

Left.

Upper.

Left.

Right.

Right.

Right.

Shielding mount. Shielding to right partition. To holder. Shielding to left partition.

Right.

Right.

Right.

Wheel arch.

Right.

Left.

Left.

Left.

Lower rear bumper.

Lower left rear-end door trim. Switch block. Frame cover. Schalter anhaengerkupplung.

Right front door control unit.

Right.

Front passenger footwell VAR 1.

Right.

From right cooler to engine. Lower.

Right.

Upper air regulation system mount. M6x24.

Cross member to side members. M14X40
Diameter: 14mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm. Caliper to steering knuckle. Brake caliper to steer. Knuckle, left.

Left.

Right cooler. Front right.

Trailer coupling. Hitch-hook. Trailer hitch mount. Switch block.

Trailer hitch. Trailer coupling.

To holder
Diameter: 6,5mm
Outside diameter: 20mm.

Right cooler to switchover valve.

Fuse and relay box. Rear var 3.

Left.

Front right. Right additional cooler.

Front passenger footwell VAR 6.

On left longitudinal member M14 X 1,5 X 40mm.