Left.

Left. Right.

Gearshift system. Gearshift mechanism. Shift mechanism, transmission tunnel at top.

Engine left rear mounting.

Main floor, left. Left reinforcement.

Under left main floor.

Right front main floor.

Crossmember, Driver Seat

Under driver's seat, left front.

Crossmember, Driver Seat

Under driver's seat, right rear.

Under left main floor.

Under right main floor.

Cover to left main floor. Mount, wheel arch liner, left. Wheel arch liner to bodyshell, front axle, front left. Cover to left rear-end floor. Rear holder mount.

Hex. Head Tapping Screw

Right side. Lateral right.

To body. Underbody left.

Reinforcement to right tunnel. Reinforcement at tunnel, right.

Main floor, left.

Front. Center tunnel. To tunnel.

M10X40
Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm. Reinforcement to tunnel at center. Assembly frame mount. Stiffener to tunnel.

M10X32
Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm. Reinforcement mount. Reinforcement to tunnel at center. Mount, stiffener to body-in-white.

Rear lid to hinge lever. Drive to rear pillar. Pipe line to shock absorber leg reinforcement. Strut to front cross member. Bracket to car floor. Cooling pipe to front cross member. Engine hood upper catch to engine hood. Partition panel. Strut to stiffening,front central.

Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 16mm.

M10X28
Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm. Fastening reinforcement. Seat mounting. Front seat to cross member. At console. Console to floor. Front seat to console m8x28. Seat framework to floor. Left. Reinforcement to tunnel at front.