Differential case. M8X65-10.9
Diameter: 8mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm.

Differential gear.

As required stahl 1,60mm. 1,60 mm. Differential gear;as required stahl,1,6mm. 1,60 mm.

As required messing 1,30mm. Differential gear;as required messing 1,3mm.

As required messing 1,60mm. Differential gear;as required messing,1,6mm.

As required messing 1,70mm. Differential gear;as required messing,1,7mm.

As required messing 1,80mm. Differential gear;as required messing,1,8mm.

As required stahl 1,30mm. 1,30 mm. Differential gear;as required stahl,1,3mm. 1,30 mm.

As required stahl 1,90mm. 1,90 mm. Differential gear;as required stahl,1,9mm. 1,90 mm.

Drive pinion.

Ring gear to differential case.

Spacer Disk, Susp. Strut

As required 76x5,34mm. 5,34 mm. Drive pinion 76x5,34mm. 5,34 mm.

As required 76x5,88mm. 5,88 mm. Drive pinion 76x5,88mm. 5,88 mm.

As required 76x5,96mm. 5,96 mm. Drive pinion 76x5,96mm. 5,96 mm.

Spacer Disk, Susp. Strut

As required 76x5,70mm. 5,70 mm. Drive pinion 76x5,70mm. 5,70 mm.

As required 76x5,44mm. 5,44 mm. Drive pinion 76x5,44mm. 5,44 mm.

As required 76x5,84mm. 5,84 mm. Drive pinion 76x5,84mm. 5,84 mm.

Spacer Disk, Susp. Strut

As required 76x5,18mm. 5,18 mm. Drive pinion 76x5,18mm. 5,18 mm.

As required 76x4,90mm. Drive pinion 76x4,90mm.

Spacer Disk, Susp. Strut

As required 76x5,74mm. 5,74 mm. Drive pinion 76x5,74mm. 5,74 mm.

As required 76x5,28mm. 5,28 mm. Drive pinion 76x5,28mm. 5,28 mm.

As required 76x5,40mm. 5,40 mm. Drive pinion 76x5,40mm. 5,40 mm.

Spacer Disk, Susp. Strut

As required 76x5,30mm. 5,30 mm. Drive pinion 76x5,30mm. 5,30 mm.

As required 76x5,54mm. 5,54 mm. Drive pinion 76x5,54mm. 5,54 mm.

As required 76x5,68mm. 5,68 mm. Drive pinion 76x5,68mm. 5,68 mm.

Spacer Disk, Susp. Strut

As required 76x5,22mm. 5,22 mm. Drive pinion 76x5,22mm. 5,22 mm.

As required 76x5,20mm. 5,20 mm. Drive pinion 76x5,20mm. 5,20 mm.

As required 76x5,48mm. 5,48 mm. Drive pinion 76x5,48mm. 5,48 mm.

Spacer Disk, Susp. Strut

As required 76x5,10mm. 5,10 mm. Drive pinion 76x5,10mm. 5,10 mm.

As required 76x5,60mm. 5,60 mm. Drive pinion 76x5,60mm. 5,60 mm.

As required 76x5,58mm. Drive pinion 76x5,58mm.

As required 76x5,52mm. 5,52 mm. Drive pinion 76x5,52mm. 5,52 mm.

As required 76x5,32mm. 5,32 mm. Drive pinion 76x5,32mm. 5,32 mm.

Inner bevel gear.

Drive pinion bearing. Outer bevel gear.

Flange

100mm.

Flange to pinion.

Differential lock.

Differential lock.

Differential lock.

Differential lock.

Differential lock. Shift lever to shaft.

Differential lock. Housing cover.

DOOR STRAP AT REAR DOOR, LEFTDiameter: 6mmStrength / hardness class: 10.9Thread code letter: MThread pitch: 1mm. DOOR CATCH TO DOOR RIGHTDiameter: 6mmStrength / hardness class: 10.9Thread code letter: MThread pitch: 1mm. DIFFERENTIAL LOCKDiameter: 6mmStren ...

M8x25-8.8. Fuel tank to console. Bracket to mounting plate or to transmission. Bracket to bumper. Shackle to torsion bar. Intermediate bearing to frame.

Differential lock.