Trim and roller blind.

Lining to backrest frame
Diameter: 7,8mm. Cable duct on hinge lever
diameter: 7,8mm. Fastening, sidewall
diameter: 7,8mm. Left covering
diameter: 7,8mm. Right trunk lining
Diameter: 7,8mm. Bottom trunk sill
diameter: 7,8mm. Mount, right trim
Diameter: 7,8mm. Protective padding mount
Diameter: 7,8mm.

Hexalobular Bolt

Bracket bearing. M5x19. Mounting roof mounted operating unit. Instrument panel to cross member. Cover on holder.

To trim. Rear armrest. Left trunk lining. Left load compartment. Trunk trim, left.

Lower.

Left loading floor.

Rear right.

To trunk sill trim.

Cover to left main floor. Mount, wheel arch liner, left. Wheel arch liner to bodyshell, front axle, front left. Cover to left rear-end floor. Rear holder mount.

Load assist function. In rear-end center section trim.

Tie-down eye. Mounting, luggage net. Partitioning net mount.

Remaining luggage compartment partition, in left side trim.

Spoiler to rear lid.

Remaining luggage compartment partition, in right side trim.