Crossmember, Rear Seat

Under rear seat. Below rear seat.

Maintenance opening for fuel pump. Without seal. Maintenance access for fuel pump.

M5x10.5. At blower;temperature sensor ventilation. Bracket to fire wall. Heat shield mounting. Control unit. Screening plates. Main floor,front right. Return line to partition panel.

Rear left.

Rear left.

Rear right. Wheel well at right, front.

Right rear wheel well.

Left.

Rear Crossmember

Under rear seat.

Rear backrest mount.

To load compartment well. 25MM. Left trunk recess. 25MM.

Cover to left main floor. Mount, wheel arch liner, left. Wheel arch liner to bodyshell, front axle, front left. Cover to left rear-end floor. Rear holder mount.

Left.

Rear right.

Rear Crossmember

To crossmember, right.

Left.

M12x1.5x47. Left trailer hitch. Left support. Reinforcement to longitudinal member lh and rh. Screw, reinforcement, longitudinal member, rear end.

Rear.

Spring strut to body. M8
Diameter: 8mm
Strength / hardness class: 8
Thread code letter: M
Thread pitch: 1,25mm
Outside diameter: 17,9mm
Width across flats: 13mm. Suspension strut to body. Torsion bar on body.

Reinforcement. Rear battery mounting.

Cross member to left front panel pillar.