Electronic Stability Program (ESP®) for 2012 Mercedes-Benz S 63 AMG®
In center of trunk. Yaw rate, lateral and longitudinal acceleration sensor. At tunnel B24/15.
Validity: This part is valid if at least one of the following applies.
- With hybrid drive, 20KW variant.
- With hybrid drive 80KW variant (including plugin).
In center of trunk. Yaw rate, lateral and longitudinal acceleration sensor B24/15.
Validity: This part is valid if at least one of the following applies.
- With hybrid drive, 20KW variant.
Acceleration sensor in wheelhouse, rear axle right. Lat. acc. sensor vertical, to front damper dome. Acceleration sensor on spring/shock absorber turret. Front axle vertical accelerator sensor. Rear axle vertical accelerator sensor. Acceleration sensor, left and right front.
In engine compartment. Bracket to wheel arch panel.
Validity: This part is valid if at least one of the following applies.
- With fire extinguisher system (after 2001-04-05).
Acceleration sensor horizontal, to center tunnel right. Vertical acceleration sensor.
Validity: This part is valid if at least one of the following applies.
- With ABC®-spring (active body control) (after 1996-12-11).
- With ABC® suspension (active body control) (after 1997-07-29).
- With ABC® suspension (active body control) (after 1996-12-11).
Mounting, sensor. Horizontal acceleration sensor.
Validity: This part is valid if at least one of the following applies.
- With ABC® with crosswind stabilisation.
Bracket mounting. 5 mm. Oxygen sensor. 5 mm. Control module, auxiliary fan. 5 mm.
Level sensor for bi-xenon rear axle. Level sensor for bi-xenon front axle. Level sensor to front axle wheelhouse. Level sensor to rear axle wheelhouse. Left and right rear level sensor. Headlamp range adjustment front. Turning angle sensor. Rear axle level sensor for air suspension. Level sensor in wheelhouse, left front axle. Level sensor to bracket, rear axle.
Left front level sensor B22/8. Level sensor front axle 6-pin. Control-unit plug-connection. Right turning angle sensor. Level sensor left rear B22/12. Right front level sensor B22/9. Validity: This part is valid if at least one of the following applies. - ...
Brake assist system and air suspension.
Validity: This part is valid if at least one of the following applies.
- Without ABC® with crosswind stabilisation, 4MATIC®, hybrid drive, 20KW variant, internal control, hambach, DISTRONIC PLUS® incl. BAS® plus and pre-safe-brake, DISTRONIC PLUS® and BAS® pro, nappa leather black, and top protection.
Brake assist system and air suspension.
Validity: This part is valid if at least one of the following applies.
- With DISTRONIC PLUS® incl. BAS® plus and pre-safe-brake or DISTRONIC PLUS® and BAS® pro.
Brake assist system and air suspension.
Validity: This part is valid if at least one of the following applies.
- With DISTRONIC PLUS® incl. BAS® plus and pre-safe-brake or DISTRONIC PLUS® and BAS® pro.
Brake assist system and air suspension.
Validity: This part is valid if at least one of the following applies.
- With (DISTRONIC PLUS® incl. BAS® plus and pre-safe-brake or DISTRONIC PLUS® and BAS® pro) and ABC® with crosswind stabilisation.
Brake assist system and air suspension.
Validity: This part is valid if at least one of the following applies.
- With (V8 spark-ignition engine M278 or V8 spark-ignition engine M157-AMG®), ABC® with crosswind stabilisation, and automatic engine start/stop function. without hybrid drive, 20KW variant, internal control, hambach, DISTRONIC PLUS® incl. BAS® plus and pre-safe-brake, and DISTRONIC PLUS® and BAS® pro.
Brake assist system and air suspension.
Validity: This part is valid if at least one of the following applies.
- With ABC® with crosswind stabilisation.
Brake assist system and air suspension.
Validity: This part is valid if at least one of the following applies.
- With ABC® with crosswind stabilisation and nappa leather black.
Brake assist system and air suspension.
Validity: This part is valid if at least one of the following applies.
- Without hybrid drive, 20KW variant, 4MATIC®, inline 4-cylinder diesel engine M651, and automatic engine start/stop function.
- With nappa leather black. without hybrid drive, 20KW variant, 4MATIC®, and DISTRONIC PLUS® incl. BAS® plus and pre-safe-brake.
Brake assist system and air suspension.
Validity: This part is valid if at least one of the following applies.
- With (DISTRONIC PLUS® incl. BAS® plus and pre-safe-brake or DISTRONIC PLUS® and BAS® pro) and ABC® with crosswind stabilisation.
Brake assist system and air suspension.
Validity: This part is valid if at least one of the following applies.
- With (DISTRONIC PLUS® incl. BAS® plus and pre-safe-brake or DISTRONIC PLUS® and BAS® pro), (V8 spark-ignition engine M278 or V8 spark-ignition engine M157-AMG®), ABC® with crosswind stabilisation, and automatic engine start/stop function.
Connector, dynamics can bus node X30/28. 5X2/1X3PIN. 6-pin. 5x2/1x3pin.
Validity: This part is valid if at least one of the following applies.
- With ABC® with crosswind stabilisation.
Acceleration sensor B24/3. X18/33. 0.5-0.75 MM2 mqs. Y51, y52. 0.5-0.75 mm2 mqs. A/c compressor A9. 0.5-0.75 MM2 mqs. Refrigerant temperature sensor B11/4. 0.5-0.75 MM2 mqs. With single-wire seal ST_A89. 0.5-0.75 MM2 mqs. Pressure sensor B18. 0.5-0.75 MM2 mqs. Valve Y113. 0.5-0.75 MM2 mqs.
B12/2. 4-pin mqs. Tire pressure monitor control module N881. 4-pin mqs. Position sensor B79/2. 4-pin mqs. Interior/engine separating point X18/7. 4-pin mqs. Pedal angle sensor B37/1. 4-pin mqs. Coolant pressure/temperature sensor B12. 4-pin mqs. Rear-view camera B84/3. 4-pin mqs. Separation point X26. 4-pin mqs. Interior motion sensor ST_B44/1. 4-pin mqs. Connecting point ABC2 X26. 4-pin mqs.
Can bus node plug-in connector X30/28. 2-pin mqs. Can bus node plug-in connector x 30/28. 2-pin mqs. Connector, potential distributor, drive train sensor can X30/38. 2-pin mqs. Voltage distributor connector (can) left X30/38. 2-pin mqs. Potential distribut ...
Validity: This part is valid if at least one of the following applies. - With model year 2008, technical modifications (after 1980-01-01), technical modifications (after 1980-01-01), or technical modifications (after 2008-01-01). - With technical modificat ...
Rear axle separation point X62/8 code d. 4-pin mqs. Connector, left rear axle electrical distributor, violet X62/324. 4-pin mqs. Connector, rear axle distributor, violet X62/32, X62/33, cod. d. 4-pin mqs.
Rear axle distributor connector left X62/8C. 4-pin mqs. Rear axle separation point X62/8 code c. 4-pin mqs. Connector, rear axle distributor, blue X62/32. Connector, left rear axle electrical distributor, blue X62/323. 4-pin mqs. Connector, right rear axle electrical distributor, blue X62/33. 4-pin mqs.
To 036 545 15 28. 2-pin (7-pin layout). Plug connection front axle, left and right. 2-pin (7-pin layout). Front axle distributor connector left X62/7. 2-pin (7-pin layout). Right front axle electrical distributor X62/6. 2-pin (7-pin layout).
Validity: This part is valid if at least one of the following applies.
- With V12 spark-ignition engine M275 biturbo.
Plug connection right front axle distributor X62/6. Speed sensor right.
Validity: This part is valid if at least one of the following applies.
- Without ABC® with crosswind stabilisation.
Plug connection right front axle distributor X62/6.
Validity: This part is valid if at least one of the following applies.
- With delta green metallic.
Plug connection front axle, left and right. 7-pin. Front axle distributor connector left X62/7. 7-pin. Right front axle electrical distributor X62/6. 7-pin.
Validity: This part is valid if at least one of the following applies.
- Without ABC® with crosswind stabilisation.
Plug connection front axle, left and right to 002 545 25 40. Front axle distributor connector left X62/7.
Validity: This part is valid if at least one of the following applies.
- With delta green metallic.
Plug connection front axle, left and right to 002 545 17 40. Front axle distributor connector left X62/7.
Validity: This part is valid if at least one of the following applies.
- Without ABC® with crosswind stabilisation.
6-Pin mqs.
Validity: This part is valid if at least one of the following applies.
- With keyless-go (after 1999-05-11).
Contact Pin
0.75 mm2 mqs. Validity: This part is valid if at least one of the following applies. - With series production 203 (after 1999-06-18), model series 204 (after 2002-02-15), model series 212 (after 2005-02-02), model series 906-van NCV3 (after 2006-02-16), s ...