Spring Strut and Spring Strut Mounting Rear for 2012 Mercedes-Benz CL 600
Air Suspension Strut, Rear right
Validity: This part is valid if at least one of the following applies.
- Without ABC® with crosswind stabilisation.
- With AIRMATIC® dual control/air suspension semi-active (after 2006-11-17).
Air Suspension Strut, Rear left
Validity: This part is valid if at least one of the following applies.
- Without ABC® with crosswind stabilisation.
- With AIRMATIC® dual control/air suspension semi-active (after 2006-11-17).
Wiring Harness
Left and right suspension strut. Air suspension strut.
Validity: This part is valid if at least one of the following applies.
- Without ABC® with crosswind stabilisation.
- With AIRMATIC® dual control/air suspension semi-active (after 2006-11-17).
Suspension strut at body, left. Spring strut to body M8.
Hydropneumatic spring leg to spring control arm. M14x1.5x80. Spring control arm to wheel bearing. Suspension strut at spring link lh and rh. Trailing arm to rear axle, top lh and rh. Validity: This part is valid if at least one of the following applies. - ...
Hex. Nut W Flange a Part
Hydropneumatic spring leg to spring control arm M14X1.5. Torsion bar linkage to suspension strut. Fastening, semi-trailing arm at left.
Validity: This part is valid if at least one of the following applies.
- With top protection.
- Without "AMG® signature series/black SERIES" special model (after 2006-03-08).
Suspension Strut
Rear axle, left. Validity: This part is valid if at least one of the following applies. - With ABC® with crosswind stabilisation. without alternator 14 V/250 a (after 2013-06-01), V8 spark-ignition engine M156-AMG®, and V8 spark-ignition engine M1 ...
Suspension Strut
Rear axle, right. Validity: This part is valid if at least one of the following applies. - With ABC® with crosswind stabilisation. without alternator 14 V/250 a (after 2013-06-01), V8 spark-ignition engine M156-AMG®, and V8 spark-ignition engine M ...
Connecting hose to hydropneumatic spring leg. M8x20. Left pressure line to suspension strut. Line to suspension strut at left. To rear left and right susp. strut. To suspension strut left front.
Validity: This part is valid if at least one of the following applies.
- Without AIRMATIC® dual control/air suspension semi-active (after 2006-11-17).
- With ABC® with crosswind stabilisation.
- With active body control (ABC®).
Left suspension strut.
Validity: This part is valid if at least one of the following applies.
- With ABC® with crosswind stabilisation.
- Without AIRMATIC® dual control/air suspension semi-active (after 2006-11-17).
Right suspension strut.
Validity: This part is valid if at least one of the following applies.
- With ABC® with crosswind stabilisation.
- Without AIRMATIC® dual control/air suspension semi-active (after 2006-11-17).
Connecting hose to hydropneumatic spring leg. Left pressure line to suspension strut. High pressure hose. Low-pressure line to return flow reservoir. Low-pressure line to valve unit. To valve block. High pressure line to pressure resevoir. High-pressure li ...
Parts kit. Parts set, left.
Validity: This part is valid if at least one of the following applies.
- With ABC® with crosswind stabilisation.
- With ABC® suspension (active body control).
Connector, transmission neutral position X220. 4-pin MLK1.2. X86/1. Nox sensor control unit separating point. connector: 1. 4-pin MLK1.2.
Front valve unit Y36/1. 4-pin mlk. Rear valve unit Y36/2. 4-pin mlk. Valve unit Y36/1, Y36/2. 4-pin mlk.
Validity: This part is valid if at least one of the following applies.
- With ABC® suspension (active body control) (after 1997-07-29).
- With AIRMATIC® dual control/air suspension semi-active (after 2006-11-17).
- With ABC® with crosswind stabilisation.