Right.

BEARING AT LEFT WHEEL CARRIERDiameter: 10mmStrength / hardness class: 10.9Thread code letter: MThread pitch: 1,5mm. Left rear wheel bearing to wheel carrierDiameter: 10mmStrength / hardness class: 10.9Thread code letter: MThread pitch: 1,5mm. Wheel hub to ...

Top left.

ACTUATOR TO REAR AXLE M8X22
Diameter: 8mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. BALL JOINT TO TRANSVERSE CONTROL ARM AT TOP, LEFT
Diameter: 8mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. FASTENING STRUT M8X22
Diameter: 8mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm.

Upper transverse control arm to left steering knuckle. M10X60-10.9
Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. Shock absorber to rear axle. Mounting, lower shock absorber. Cross member, top, at steering knuckle, left. Mount, reinforcement to tunnel. Cross strut mount. Engine mount to left and right engine carrier. Mass damper and engine mount to left engine carrier.

Left.

Left.

Left, adjustable bearing.

Left, adjustable bearing. Left, only for camber/caster adjustment.

Left and right. Spring control arm to wheel bearing. Left suspension strut. Wheel carrier. Left spring link.

Spring link to frame-type int. M14x1.5. Thrust arm to support. Spring control arm to integral carrier, left. Spring control arm at frame. Torque strut to frame-type int.

M14X1.5
Diameter: 14mm
Strength / hardness class: 10
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 21mm. Strut rod to integral carrier. Cross strut to integral carrier. Transverse control arm to left steering knuckle. Torque strut to frame-type int. Supp.. Lower transverse control arm to left wheel carrier.

Lower control arm to steering knuckle, left. M16. Transverse control arm at left wheel carrier.

Right.

Left.

For adjusting work only. Parts kit.

Left and right at strut rod bearing. Hydromount cover, left.