Transmission Cooling for 2011 Mercedes-Benz G55 AMG

In bracket. Low temperature radiator. Oil cooler in wheelhouse.

Oil cooler,left.

Bracket to stabilizer. Torsion bar to link. Universal joint to steering column.

Oil cooler to bracket.

To oil cooler left.

Oil cooler.

Rear lid to hinge lever. Drive to rear pillar. Pipe line to shock absorber leg reinforcement. Strut to front cross member. Bracket to car floor. Cooling pipe to front cross member. Engine hood upper catch to engine hood. Partition panel. Strut to stiffening,front central.

From radiator to right air/oil cooler.

From cooler to right connecting point.

Torque converter housing to oil cooler at left. From transmission to oil cooler,left. From connecting point to transmission, left.

Oil cooler to torque converter housing right. From transmission to oil cooler,right. From connecting point to transmission, right.

Oil line to transmission
Diameter: 14mm
Strength / hardness class: ST
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 19mm. OIL LINE TO CASE
Diameter: 14mm
Strength / hardness class: ST
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 19mm. Oil line to torque converter housing
Diameter: 14mm
Strength / hardness class: ST
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 19mm.

M6. Bracket to water tank. Mounting parts. Control unit. Bracket mounting. Brake booster assembly to asr bracket. Fuel lines to cowl. Transistorized ignition switchgear to wheelhouse panel. Roller blind to rear panel covering, top.

Bracket to c-pillar. Additional pump m6x10. Bracket to support m 6x10. Front axle brake hose. Hook to side panel m 6x10. At steering gear m6 x 10. Horn to bracket m6x10. On upper frame cross member. Charge plunger unit.

Clip-Type Nut

Bracket to left wheelhouse. Rear seat bench backrest to rear panel. Wheel well reinforcement, left. Mounting to body.