On spring dome,left.

Bracket of activated charcoal filter on wheelhouse. Inner trunk floor, left. To plug tapped hole m6. Roof member mounting.

Regeneration valve to engine.

Separating point to purge valve.

At valve. Regeneration valve. Attachment.

In wheelhouse right rear. Regeneration line.

FROM ACTIVATED CHARCOAL FILTER TO REGENERATION LINE
Inside diameter: 9,3mm
Outside diameter: 15,3mm
Material thickness: 3mm.

Carbon filter to fuel tank. Between tank and activated-carbon filter.

Mounting of molded hose on purge line. Hose to breather line. Tank breather line. Return line from engine. Breather line to activated charcoal filter. Hose to purge line. Return hose.

For weld stud T5. 4,6X155 MM. Insulation mounting. 4,6x155 mm. To line. 4,6x155 mm. Mounting material. 4,6X155 MM. Tank breather line. 4,6x155 mm. Line mounting. 4,6X155 MM. Return. 4,6X155 MM. Drain hose to body-in-white. 4,6X155 MM.

From tank to activated charcoal filter.

DE-AERATION LINE
Inside diameter: 17mm
Outside diameter: 25mm
Material thickness: 4mm.

M6x20. At air conditioner case or heater case.

Breather line to wheel arch.

De-aeration line. Breather line to wheel arch.

Shutoff valve adapter line. Activated charcoal filter shutoff valve.

Regeneration valve y58/1. 2-pin apex2.8
model 1: apex
model 2: 2.8
slots: 2. (switchover valve), for activated charcoal filter y58/1. 2-pin apex2.8
model 1: apex
model 2: 2.8
slots: 2.