Steering Knuckle and Transverse Control Arm for 2008 Mercedes-Benz C63 AMG
Mercedes-Benz Steering gear to integral carrierDiameter: 12mmStrength / hardness class: 10.9Thread code letter: MThread pitch: 1,5mm. Wheel bearing to left steering knuckle, upper M12X1.5X70Diameter: 12mmStrength / hardness class: 10.9Thread code letter: MThread pitch: ...
Mercedes-Benz M10X95
Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. Transverse control arm to body at left.
Mercedes-Benz M10X90
Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. Starter position without starter. Transmission to engine. Starter mount. Starter fastening. Transmission case to crankcase. Starting motor to crankcase. Heat shield mounting. Motor to gearing.
Mercedes-Benz Hex. Nut W Flange + Piece
M14X1,5
Diameter: 14mm
Strength / hardness class: 10
Thread code letter: M
Thread pitch: 1,5mm. Arm to steer. Knuck. Transverse control arm to left body. Nut, ball joint, transverse control arm, left, upper, front axle.
Mercedes-Benz Left, adjustable bearing. Left, only for camber/caster adjustment.
Mercedes-Benz Left, adjustable bearing. Left, only for camber/caster adjustment.
Mercedes-Benz Left, adjustable bearing. At left, adjustment bearing.
Mercedes-Benz M14X1,5X125
Diameter: 14mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm. Left spring link to integral carrier. Torque strut to integral carrier, left. Spring link left to frame-type integral support.
Mercedes-Benz M14X1.5
Diameter: 14mm
Strength / hardness class: 10
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 21mm. Strut rod to integral carrier. Cross strut to integral carrier. Transverse control arm to left steering knuckle. Torque strut to frame-type int. Supp.. Lower transverse control arm to left wheel carrier.
Mercedes-Benz Lower control arm to steering knuckle, left. M16. Transverse control arm at left wheel carrier.
