Rear axle housing with differential.

Ring gear bearing.

Fuse

As required 4.10 mm. 4.10 mm.

As required 4.30 mm. 4.30 mm.

As required 4.40 mm. 4.40 mm.

As required 4.20 mm. 4.20 mm.

Bearing left and right. 3.70 mm. As required 3.70 mm. 3.70 mm.

For vent fitting. Front axle gear. . Breather valve. Rear axle differential. Rear axle housing.

End cover.

Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 16mm.

Less ring gear and pinion. Without gear set.

As required 1,40 mm. 1.40 mm.

As required 1,35 mm. 1.35 mm.

As required 1,45 mm. 1.45 mm.

As required 1,55 mm. 1.55 mm.

As required 1,30 mm. 1.30 mm.

Nut

M29X1.5
Diameter: 29mm
Strength / hardness class: ST
Thread code letter: M
Thread pitch: 1,5mm
Outside diameter: 48mm
Width across flats: 41mm. Screw fitting joint flange. Flange to drive pinion. E63. C300, C300 4-matic. Manual trans. Joint flange to crown gear. Joint flange threaded connection. Joint flange to bevel gear.

Propeller shaft 4 LOCH. 120 MM.

Drive pinion.

Bearing Sleeve

Drive pinion. Pinion bearing.