Expansion Plugs, Grommets for 2006 Mercedes-Benz CL 55 AMG®
Mercedes-Benz IN COVERING A-PILLAR RIGHT. 6.5mm
Inside diameter: 6,5mm
Outside diameter: 9mm. To trunk lid. 6.5mm
Inside diameter: 6,5mm
Outside diameter: 9mm. PAINT RUN-OFF HOLES IN REAR PANEL. 6.5mm
Inside diameter: 6,5mm
Outside diameter: 9mm. FOR PLUGGING THE BORES IN THE WHEEL HOUSE. 6.5mm
Inside diameter: 6,5mm
Outside diameter: 9mm. PAINT HOLE IN TRUNK LID 6.5mm. 6.5mm
Inside diameter: 6,5mm
Outside diameter: 9mm.
Mercedes-Benz Insulation mounting. 8.5 mm. Rear seat framework. 8.5 mm. Engine cross member 10mm. 8.5 mm. Damping to partition wall rearwall. 8.5 mm. Lining to backrest. 8.5 mm. Tunnel,front. 8.5 mm. At covering. 8.5 mm. To plug the mounting holes in the engine support 10mm. 8.5 mm. Left. 8.5 mm.
Mercedes-Benz In air inlet covering,used for windshield wiper setting opening.
Mercedes-Benz Bottom left cross member. 22.5 mm. On main floor 22.5 mm. 22.5 mm. Paint drain and locating hole in cross member, rear axle 22,5 mm. 22.5 mm. Rear axle take-up,front left. 22.5 mm. At tunnel. 22.5 mm.
Mercedes-Benz Panelling to side member 20 mm. At left side member, bottom 17,1 mm. At bracket.
Mercedes-Benz At left side member, bottom 16,8 mm. Mounting of longitudinal member paneling.
Mercedes-Benz On left front rocker panel. 26 mm. Floor water drain,lateral left & right. 26 mm. Water drain left longitudinal member. 26 mm. Side panel water drain 26 mm. 26 mm. Left and right rear side members. 26 mm. On door sill, left. 26 mm. Spare wheel well water drain. 26 mm. In rear locking lug below left and right. 26 mm.
Mercedes-Benz Lifting platform support 28.5 mm. Workshop jack socket in side member, lateral left 28mm. Jack tube front left. Workshop lifting jack take-up device in side member,bottom 25 x 7,5 mm. Workshop jack socket in side member, front 28mm.
Mercedes-Benz Workshop lifting jack take-up device in side member,bottom 28mm. Mount workshop jack in longitudinal member, front left 30mm. Take-up device lock at floor, hard-rubber buffer used for jack 28mm. Workshop vehicle lifter fixture in side member, bottom left 28mm.
Mercedes-Benz Covering to side member 36 x 15 mm. 36x15 mm. In transport mounting reinforcement 36 x 15 mm. 36x15 mm. Cargo securing, at left and right bottom longitudinal member 36 x 15 mm. 36x15 mm. Mounting in transit;at side members, rear left and right only for usa 36 x 15 mm. 36x15 mm. Lashing aperture 36x15 mm. 36x15 mm. Tourist's vehicle 36 mm. 36x15 mm.
Mercedes-Benz At fire wall, top. 55x30 mm. In b-pillar, center left 55x30 mm. 55x30 mm. Crossmember below wind deflector, left. 55x30 mm. Water tank drain 54 x 29 mm. 55x30 mm. Radiator tank 54 x 29. 55x30 mm. Damper strut console 55 x 30 mm. 55x30 mm. Left and right side members. 55x30 mm.
Mercedes-Benz Rear wheelhouse. To plug the hole in front side member end piece 50mm. End piece 90x50 mm.