Axle Housing

Rear axle differential without flange. 1:3.06. Rear axle center assembly without flange. 1:3.06.

Rear axle.

End cover.

To rear axle housing. Rear axle housing with differential. Left rear axle housing.

For vent fitting. Front axle gear. . Breather valve. Rear axle differential. Rear axle housing.

As required 1.90 mm. 1.90 mm.

As required 2.55 mm. 2.55 mm.

As required 1.45 mm. 1.45 mm.

As required 1.55 mm. 1.55 mm.

As required 1.85 mm. 1.85 mm.

As required 2.45 mm. 2.45 mm.

As required 1.60 mm. 1.60 mm.

As required 1.70 mm. 1.70 mm.

As required 2.70 mm. 2.70 mm.

As required 2.15 mm. 2.15 mm.

As required 1.65 mm. 1.65 mm.

As required 1.50 mm. 1.50 mm.

As required 2.65 mm. 2.65 mm.

As required 2.00 mm. 2.00 mm.

As required 2.35 mm. 2.35 mm.

Left and right drive shaftInside diameter: 47mmOutside diameter: 126mmMaterial thickness: 18mm. INTERIOR FLANGEInside diameter: 47mmOutside diameter: 126mmMaterial thickness: 18mm. LEFT AND RIGHT AXLE SHAFTInside diameter: 47mmOutside diameter: 126mmMateri ...

As required 4.10 mm. 4.10 mm.

As required 4.40 mm. 4.40 mm.

As required 3.80 mm. 3.80 mm.

As required 3.90 mm. 3.90 mm.

As required 4.30 mm. 4.30 mm.

Drive pinion.

Drive pinion. Pinion bearing.

Sealing Ring

E63. DRIVE PINION HAG 215
Inside diameter: 49mm
Outside diameter: 86mm
Material thickness: 11mm.

Propeller shaft. Joint flange 110mm.

Nut

M29X1.5
Diameter: 29mm
Strength / hardness class: ST
Thread code letter: M
Thread pitch: 1,5mm
Outside diameter: 48mm
Width across flats: 41mm. Screw fitting joint flange. Flange to drive pinion. E63. C300, C300 4-matic. Manual trans. Joint flange to crown gear. Joint flange threaded connection. Joint flange to bevel gear.

As required 1,65 mm. 1.65 mm.

As required 1,55 mm. 1.55 mm.

As required 1,60 mm. 1.60 mm.

As required 1,35 mm. 1.35 mm.

6X45 MM
Diameter: 6mm.

Ring gear to differential case. M12x22. Crown gear to differential housing.

Cap

Heat sink. Rectifier bridge. To rear axle cover.