Housing

Rear axle center assembly without flange.

Rear axle center assembly with flange i = 2.82.

Rear axle housing with differential. End cover.

End cover to transmission case.

To rear axle housing. Rear axle housing with differential. Left rear axle housing.

For vent fitting. Front axle gear. . Breather valve. Rear axle differential. Rear axle housing.

Fuse

As required 3.90 mm. 3.90 mm.

Bearing left and right. 3.70 mm. As required 3.70 mm. 3.70 mm.

Securing

Bearing left and right 3.60 mm. 3.60 mm. As required 3.60 mm. 3.60 mm. Drive pinion. 3.60 mm.

Bearing left and right. 4.50 mm. As required 4.50 mm. 4.50 mm.

As required 4.00 mm. 4.00 mm.

Ring gear bearing.

Inside.

As required 1.55 mm. 1.55 mm.

As required 1.75 mm. 1.75 mm.

As required 1.80 mm. 1.80 mm.

As required 1.30 mm. 1.30 mm.

As required 1.90 mm. 1.90 mm.

As required 2.00 mm. 2.00 mm.

Parts Kit, Rr. Axle Diff

Axle shaft to rear axle shaft flange left. Axle shaft to interior flange. Propeller shaft to flange. Rear wheel bearing, left and right.

As required 1,30 mm. 1.30 mm.

1:2.65. 1:2.65.

Ring gear to differential case. M12x22. Crown gear to differential housing.

As required 1,90 mm.

As required 1,60 mm.

As required 2,20 mm.

As required 2,10 mm.

As required 2,00 mm.

As required 1,80 mm.

As required 2,15 mm.

As required 2,25 mm.

Drive pinion.

Drive pinion. Pinion bearing.

Flange

Joint flange 110 mm. C43 AMG. 110mm. Propeller shaft 3 LOCH. 110mm.

Nut

M29X1.5
Diameter: 29mm
Strength / hardness class: ST
Thread code letter: M
Thread pitch: 1,5mm
Outside diameter: 48mm
Width across flats: 41mm. Screw fitting joint flange. Flange to drive pinion. E63. C300, C300 4-matic. Manual trans. Joint flange to crown gear. Joint flange threaded connection. Joint flange to bevel gear.

Extension to axle housing.