Rear axle center assembly without flange.

Rear axle.

Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 16mm.

To rear axle housing. Rear axle housing with differential. Left rear axle housing.

Rear axle housing with differential. M 14 x 1,5. Differential gear. Right m 14x1,5.

Cap

To rear axle differential. . Rear axle housing. Breather. Vent tube.

Fuse

As required 4.00 mm. 4.00 mm.

As required 4.20 mm. 4.20 mm.

Securing

Bearing left and right 3.60 mm. 3.60 mm. As required 3.60 mm. 3.60 mm. Drive pinion. 3.60 mm.

Bearing left and right. 3.70 mm. As required 3.70 mm. 3.70 mm.

As required 4.30 mm. 4.30 mm.

Interior flange. Drive pinion hag 210.

As required 1.55 mm. 1.55 mm.

As required 2.10 mm. 2.10 mm.

As required 1.65 mm. 1.65 mm.

As required 2.30 mm. 2.30 mm.

As required 2.35 mm. 2.35 mm.

As required 2.20 mm. 2.20 mm.

As required 2.00 mm. 2.00 mm.

As required 2.55 mm. 2.55 mm.

As required 2.70 mm. 2.70 mm.

As required 1.70 mm. 1.70 mm.

As required 1.95 mm. 1.95 mm.

As required 2.25 mm. 2.25 mm.

As required 2.15 mm. 2.15 mm.

As required 2.50 mm. 2.50 mm.

As required 1.80 mm. 1.80 mm.

Differential Gear

Less ring gear and pinion. Without gear set.

Side Gear

6X45 MM
Diameter: 6mm.

Ring gear to differential case. M12x22. Crown gear to differential housing.

As required 2,30 mm.

As required 1,50 mm.

As required 2.40 mm (c 36 amg).

As required 1,95 mm.

As required 2,05 mm.

As required 1,70 mm.

As required 1,55 mm.

As required 1,80 mm.

As required 2,00 mm.

Drive pinion.

Drive pinion. Pinion bearing.

Propeller shaft. Joint flange 110mm.

Collar Nut, Ra Transm

M29X1.5
Diameter: 29mm
Strength / hardness class: ST
Thread code letter: M
Thread pitch: 1,5mm
Outside diameter: 48mm
Width across flats: 41mm. Screw fitting joint flange. Flange to drive pinion. E63. C300, C300 4-matic. Manual trans. Joint flange to crown gear. Joint flange threaded connection. Joint flange to bevel gear.

To axle housing.

Mounting parts. Fastening parts to spring link.