Rear axle center assembly without flange. 1:2.82.

Rear axle housing with differential.

End cover.

To rear axle differential. . Rear axle housing. Breather. Vent tube.

M 24x1.5. Oil drain screw. .. Drain screw, rear axle differential. Filling and drain screw. Oil refilling. Housing. Left and right.

Fuse

As required 4.40 mm. 4.40 mm.

As required 4.30 mm. 4.30 mm.

As required 4.20 mm. 4.20 mm.

Bearing left and right. 3.70 mm. As required 3.70 mm. 3.70 mm.

Bearing left and right. 4.50 mm. As required 4.50 mm. 4.50 mm.

Interior flange. Drive pinion hag 210.

Drive shaft interior. Inner drive shaft. Interior flange to a 211 350 05 56. Inside right. Left. Right drive shaft.

As required 1,70 mm. 1.70 mm.

As required 1,45 mm. 1.45 mm.

As required 1,55 mm. 1.55 mm.

As required 1,40 mm. 1.40 mm.

As required 1,65 mm. 1.65 mm.

1:2.82. 1:2.82.

Collar Nut, Ra Transm

M29X1.5
Diameter: 29mm
Strength / hardness class: ST
Thread code letter: M
Thread pitch: 1,5mm
Outside diameter: 48mm
Width across flats: 41mm. Screw fitting joint flange. Flange to drive pinion. E63. C300, C300 4-matic. Manual trans. Joint flange to crown gear. Joint flange threaded connection. Joint flange to bevel gear.

Propeller shaft. 110mm. Joint flange to housing. 110mm.

Drive pinion.

Drive pinion. Pinion bearing.

Drive pinion.