Rear Axle Mount for 2001 Mercedes-Benz CLK430
Mercedes-Benz With lower control arm joint and wheel mounting,left.
Mercedes-Benz Left and right. Spring control arm to wheel bearing. Left suspension strut. Wheel carrier. Left spring link.
Mercedes-Benz Rear-Axle Wheel Flange
Wheel carrier, left and right. Left m8.
Mercedes-Benz Parts Kit, Spring Link
Fastening parts to spring link. Mounting parts.
Mercedes-Benz Screw
M14x1.5x90. Spring control arm to wheel bearing left. Spring control arm to wheel bearing m 14x1,5x75.
Mercedes-Benz M14X1.5
Diameter: 14mm
Strength / hardness class: 10
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 21mm. Tie rod to steering knuckle. Intermediate lever to pivot bearing. Trailer hitch to frame. Extension to rear subframe,front. Rod to spring control arm. Joint to steering knuckle left. Joint to steering knuckle m14 x 1,5. Joint to wishbone. Spring control arm to wheel bearing m14 x 1,5.
Mercedes-Benz M12X1.5 X 90
Diameter: 12mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1,5mm. Spring control arm to rear subframe m 12x1,5x90. Spring control arm to rear subframe m12 x 1,5 x 90.
Mercedes-Benz Spring control arm to rear subframe. Upper transverse control arm to steering knuckle. Lower control arm to steering knuckle. Torsion bar to frame. Lower joint to control arm. Joint to steering knuckle. Shock absorber to lower control arm.
Mercedes-Benz Protective plate to spring control arm. Covering to spring control arm. Trim mount to left spring link. Mounting, cover. Guard to left spring link. Cover on spring link and thrust arm. At left side member.
Mercedes-Benz Parts Kit, Tension Strut
Camber struts to wheel bearing. Camber struts to wheel carrier left.
Mercedes-Benz M12x1.5x80. Camber struts to wheel carrier left. Thrust arm to wheel bearing to a 220 350 31 06. Camber struts to wheel bearing m 12x1,5x80.
Mercedes-Benz PIVOT PIN TO FRONT SUBFRAME
Diameter: 12mm
Strength / hardness class: 200 HV
Inside diameter: 13mm
Outside diameter: 20mm
Material thickness: 2mm. CLAMP TO BRACKET
Diameter: 12mm
Strength / hardness class: 200 HV
Inside diameter: 13mm
Outside diameter: 20mm
Material thickness: 2mm.
Mercedes-Benz Refrigerant compressor to support. Bearing cup to bearing bracket.
Mercedes-Benz Bolt
Thrust arm, camber strut and strut on rear subframe. M12x1.5x60. Camber struts to rear subframe. Thrust arm/camber strut/tension rod to rear-axle bracket. Thrust arm to rear subframe.
Mercedes-Benz Repair size. With eccentric interior bushing. Tie rod to rear subframe. Left and right.
Mercedes-Benz Repair size. Tie rod. With eccentric interior bushing left. For adjusting work only.
Mercedes-Benz M10
Diameter: 10mm
Strength / hardness class: 10
Thread code letter: M
Thread pitch: 1mm
Width across flats: 16mm. Propeller shaft to transmission. Shock absorber to lower control arm m 10x1. Shock absorber to spring control arm m 10x1. Hydropneumatic spring leg to spring control arm m 10. Shock absorber to frame. Hydropneumatic spring leg to rear axle.
Mercedes-Benz M10
Diameter: 10mm
Strength / hardness class: 10
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 16mm. Rod to torsion bar. Shock absorber to frame. Trailer coupling to bracket. Camber struts to wheel bearing m 10. Shock absorber to spring control arm m 10. Axle housing to rear subframe. Tie rod to wheel bearing m10.
Mercedes-Benz Parts Kit, Eccent. Screw
Tie rod to rear subframe. For adjusting work only.
