Housing

Rear axle center assembly without flange. 1:3.07.

M 24x1.5. Oil drain screw. .. Drain screw, rear axle differential. Filling and drain screw. Oil refilling. Housing. Left and right.

As required 4.30 mm. 4.30 mm.

As required 3.80 mm. 3.80 mm.

As required 3.90 mm. 3.90 mm.

As required 4.05 mm. 4.05 mm.

As required 4.10 mm. 4.10 mm.

As required 4.00 mm. 4.00 mm.

As required 4.40 mm. 4.40 mm.

As required 4.15 mm. 4.15 mm.

Transfer case. Rear axle housing.

Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 16mm.

Less ring gear and pinion. Without gear set.

Rear axle output.

Rear axle output.

1.25 mm as required. 1.25 mm.

1.55 mm.

1.65 mm.

1.0 mm as required. 1.00 mm.

1.4 mm. 1.40 mm. 1.40 mm as required. 1.40 mm.

1.6 mm. 1.60 mm.

1.2 mm as required. 1.20 mm.

Nut

M29X1.5
Diameter: 29mm
Strength / hardness class: ST
Thread code letter: M
Thread pitch: 1,5mm
Outside diameter: 48mm
Width across flats: 41mm. Screw fitting joint flange. Flange to drive pinion. E63. C300, C300 4-matic. Manual trans. Joint flange to crown gear. Joint flange threaded connection. Joint flange to bevel gear.

Drive pinion.

Drive pinion. Pinion bearing.

Drive pinion.