Axle Housing

Rear axle housing with differential, automatic five-speed transmission 1:2,82.

M24x1,5. Oil refilling. For oil drain and oil filler. For oil filler, transmission. (for oil drain and oil filling). (oil filling and oil drain at transmission). For filling in oil or draining off oil resp. At transmission for filling in oil up to transmission 6515822. For oil drain and oil tilling.

As required 1.40 mm. As required 1.4 mm.

As required 1.6mm. As required 1.60 mm.

As required 1.35 mm.

As required 1.5mm. As required 1.50 mm.

Used without automatic locking differential (asd).

6X45 MM
Diameter: 6mm.

Ring gear bearing. Differential gear. Right.

As required 1.1 mm. 1.10 mm.

As required 1.5mm. As required 1.50. 1.50 mm.

1.60 mm.

2.10 mm.

Bearing cover to axle housing. Clutch pressure plate to flywheel m8x22. Ring cylinder to rear axle housing m 8x12.

Repair Kit

Axle shaft seal ring.

As required 3.15 mm.

As required 2.85 mm.

As required 2.7 mm. 2.70 mm as required.

As required 2.75 mm.

Spacer Disk

As required 2.4 mm. 2.40 mm.

As required 1.9 mm. 1.90 mm.

As required 2.3 mm. 2.30 mm.

As required 2.0 mm. 2.00 mm.

Drive pinion bearing.

Drive pinion. Pinion bearing. Only used with asd.

Drive pinion.

Collar Nut, Ra Transm

M26X1.5
Diameter: 26mm
Strength / hardness class: ST
Thread code letter: M
Thread pitch: 1,5mm
Outside diameter: 38mm
Width across flats: 30mm. Joint flange to bevel gear. Screw fitting joint flange. Flange to drive pinion. Only used with asd.

Hexalobular Screw

Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm
Width across flats: 16mm.

Rear axle housing with differential. M 14 x 1,5. Differential gear. Right m 14x1,5.