With pitman arm.

M10X60
Diameter: 10mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. Engine mounting to engine support. Pitman arm to steering box assembly. Engine mount to engine carrier. Hydropneumatic spring leg to spring control arm. Shock absorber to lower control arm. Shock absorber to spring control arm.

M10
Diameter: 10mm
Strength / hardness class: 10
Thread code letter: M
Thread pitch: 1mm
Width across flats: 16mm. Propeller shaft to transmission. Shock absorber to lower control arm m 10x1. Shock absorber to spring control arm m 10x1. Hydropneumatic spring leg to spring control arm m 10. Shock absorber to frame. Hydropneumatic spring leg to rear axle.

Steering worm bearing.

COVER TO STEERING BOX
Diameter: 8mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm.

Adjusting screw.

Adjusting screw. Steering shaft to box m12 x 1,5.

2.95 mm as required.

2.70 mm as required.

Cover to box. Steering shaft to box.

Adjuster.

Lower steering shaft to upper steering shaft. Shock absorber to lower control arm. Steering coupling to steering shaft. Steering coupling to steering gear. Backrest adjuster.

Bolt

Steering coupling to steering gear. M8x39. Steering joint to steering gear and to steering shaft. Steering coupling to steering shaft and to steering. Lower steering shaft to upper steering shaft. Steering coupling to steering shaft m8 x 40. Screw universal joint. Steering coupling to steering shaft m8 x 39.

Steering to frame.