Axle Housing

Rear axle housing with differential asd 1:2.82.

Used without with acceleration skid control (asr).

M24x1,5. Oil refilling. For oil drain and oil filler. For oil filler, transmission. (for oil drain and oil filling). (oil filling and oil drain at transmission). For filling in oil or draining off oil resp. At transmission for filling in oil up to transmission 6515822. For oil drain and oil tilling.

Less ring gear and pinion.

As required 1.55 mm.

As required 2.8 mm.

As required 1.45 mm.

As required 1.7 mm. As required 1.70 mm.

As required 2.9 mm.

As required 1.40 mm. As required 1.4 mm.

As required 1.5mm. As required 1.50 mm.

As required 1.6mm. As required 1.60 mm.

As required 4.0 mm.

Used without automatic locking differential (asd).

6X45 MM
Diameter: 6mm.

Z=34.

Ring gear bearing. Differential gear. Right.

As required 1.4 mm. 1.40 mm.

Spacer Washer

1.60 mm.

Spacer Washer

2.00 mm.

2.10 mm.

Bearing cover,right.

Bearing cover to axle housing. Inner joint. Outer left.

De-aeration valve.

Interior flange.

Inside right.

Only used with asd. Interior flange.

As required 2.75 mm.

As required 3.15 mm.

As required 3.35 mm.

As required 1.75 mm. Axle shaft flange to axle housing.

Spacer Washer

As required 2.0 mm. 2.00 mm.

Spacer Washer

As required 1.9 mm. 1.90 mm.

Spacer Washer

As required 1.6mm. 1.60 mm.

As required 2.3 mm. 2.30 mm.

Pinion bearing. Only used with asd. Drive pinion.

Drive pinion bearing. Outer bevel gear.

Drive pinion.

Nut

M26X1.5
Diameter: 26mm
Strength / hardness class: ST
Thread code letter: M
Thread pitch: 1,5mm
Outside diameter: 38mm
Width across flats: 30mm. Joint flange to bevel gear. Screw fitting joint flange. Flange to drive pinion. Only used with asd.

End cover to transmission case.

End cover to housing.

Screw

Extension to axle housing.

Mounting parts. Fastening parts to spring link.