Heater housing.

Operating unit to heater case.

Light switch to instrument panel. Light rotary switch. Operating unit. Central covering to heater case. Air-conditioner temperature/vacuum switch to covering in case.

Operating unit to fresh air flap.

Blower switch. Operating unit lever to legroom flap lever at central air duct.

At operating unit bracket, used for automatic heating,left.

Air nozzle lighting. 12v/0.5w.

Automatic air conditioner.

(push button),refrigerant compressor off.

(push button),overall ventilation.

Blower maximum output control.

Blower minimum output control.

Inboard. On roof rail.

Breathing,to temperature sensor &thermostat,thru right front panel pillar.

Clip

Line mounting. To tank drainage. Tank filler neck drain pipe. Vacuum line. Hose. Wiring harness fastening starter/ alternator.

Temperature sensor ventilation. Blower to air duct.

At blower;temperature sensor ventilation.

Heater case,right. At blower;temperature sensor ventilation.

Between air-blast nozzle and breather fitting.

Air guide hose to roof rail and to airblast nozzle. Between air-blast nozzle and breather fitting.

(air-blast nozzle).

Air-blast nozzle to heater case.

Air-blast nozzle to heater case.

Temperature selector. To 124 830 31 85.

Selector

To bosch. To 124 830 23 85. To 124 830 24 85.

Temperature selector.

3.5 x 9.5 mm. Temperature switch.

Between roof rail mounted temperature feeler hose and blower.