Axle Housing

Rear axle housing with differential, automatic four-speed transmission abs 1:3.07.

M24x1,5. Oil refilling. For oil drain and oil filler. For oil filler, transmission. (for oil drain and oil filling). (oil filling and oil drain at transmission). For filling in oil or draining off oil resp. At transmission for filling in oil up to transmission 6515822. For oil drain and oil tilling.

Less ring gear and pinion.

As required 2,8 mm.

As required 4,0 mm.

As required 3,4 mm.

As required 3,0 mm.

1.5 mm. 1.50 mm. 1.50 mm as required. 1.50 mm.

1.25 mm as required. 1.25 mm.

1.55 mm.

Only used with asd.

Only used with asd. Rear axle output. Differential gear.

Used without automatic locking differential (asd). Rear axle output.

Less lining. With 5 shackles.

Less lining. With 4 shackles & 2 notches.

1:3.67.

Z=26 fuer 1:3.69.

3.60 mm. 3.60 mm.

3.95 mm. 3.95 mm.

4.30 mm. 4.30 mm.

4.00 mm. 4.00 mm.

3.80 mm. 3.80 mm.

Interior flange.

Interior flange.

Left.

Bearing cover to axle housing. Clutch pressure plate to flywheel m8x22. Ring cylinder to rear axle housing m 8x12.

Gasket kit.

Inside.

Flange

Inside.

As required 1.0 mm. 1.00 mm.

1.05 mm.

0.85 mm.

0.95 mm.

As required 2.2 mm.

As required 1,3 mm.

As required.

As required 1,2 mm.

As required 1,7 mm.

As required 1.5mm. As required 1,5 mm.

As required 1,4 mm.

As required 2.4 mm. 2.40 mm.

As required 1.6mm. 1.60 mm.

Spacer Washer

As required 1.8mm. 1.80 mm. As required 1.85 mm.

As required 1.7 mm. 1.70 mm.

Pinion bearing. Only used with asd. Drive pinion.

Drive pinion bearing. Outer bevel gear.

Drive pinion.

Joint flange 90mm. Propeller shaft.

End cover.

Rear axle housing with differential. M 14 x 1,5. Differential gear. Right m 14x1,5.