Steering Knuckle and Control Arm for 1989 Mercedes-Benz 300SE

Left.

Steering knuckle,bottom.

Left.

Bolt

Steering arm to steering knuckle m 12 x 1,5 x 43.

( a b s ).

Outside.

Cap Screw

M6X25
Diameter: 6mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. Lock wedge to door. Striker to door. Left clamping piece. Wheel hub to kingpin. Front wheel hub to steering knuckle, left and right.

Front wheel hub to steering knuckle left.

Repair Kit, Roller Bear

Front wheel bearing.

Top right. Right,with rubber mounting.

UPPER CONTROL ARM TO FRAMEDiameter: 12mmStrength / hardness class: 10.9Thread code letter: MThread pitch: 1,5mm. AXLE SHAFT TO WHEEL BEARING M 12 X 1;5 X 100Diameter: 12mmStrength / hardness class: 10.9Thread code letter: MThread pitch: 1,5mm. Tie rod to l ...

M10X1
Diameter: 10mm
Strength / hardness class: 8
Thread code letter: M
Thread pitch: 1mm
Width across flats: 17mm. Upper transverse control arm to steering knuckle. Bumper to body. To 107 330 01 03. Drag link to pitman arm and to steering intermediate arm to a1264600805,a1264600905. To 107 460 06 05. Tie rod to steering arm. Shock absorber to frame. To 123 460 15 05. To 126 460 09 05.

Upper control arm to torsion bar.

Bottom left. Left,with rubber mounting.

Lower control arm to frame. Eccentric pin.

Right.

Cover plate to wheel bearing.

Wiper arm with blade to wiper spindle. Drive rod to crank arm. Wiper arm to wiper shaft. Wiper arm on spindle.

Left.

Right.

Front.

(bearing cup),brake bracing.

Bearing cup to bearing bracket.

Bearing cup to bearing bracket. Upper transverse control arm to steering knuckle m10.

Bearing bracket to frame.

Upper control arm joint boot. Upper transverse control arm to steering knuckle.

Repair Kit, Control Arm

Brake bracing to control arm.

Parts Kit, Bolt

Eccentric pin.

Repair Kit, Front Axle

Brake anchor to steering knuckle. Caliper to wheel bearing. Caliper to steering knuckle. Brake caliper to wheel carrier left. Rear wheel bearing, left and right.