Engine Hood for 1985 Mercedes-Benz 300 D
Mercedes-Benz Amplifier at c-pillar. Amplifier to bracket. Reinforcem. At bracket, left.
Mercedes-Benz Hinge lever to cowl. Heater case to fire wall. Stop to interior part. Engine hood hinge to rear wheelhouse. Bumper on fender. Roller blind to rear panel covering, top.
Mercedes-Benz Engine hood release cable to stiffening,front central & lateral left. Engine hood release cable to front panel,bottom. Seal to strut.
Mercedes-Benz M6-10
Diameter: 6mm
Strength / hardness class: 10
Thread code letter: M
Thread pitch: 1mm
Width across flats: 10mm.
Mercedes-Benz Screw
Amplifier at c-pillar. Amplifier to bracket. Reinforcem. At bracket, left.
Mercedes-Benz Nut
M6-10
Diameter: 6mm
Strength / hardness class: 10
Thread code letter: M
Thread pitch: 1mm
Width across flats: 10mm.
Mercedes-Benz Wiper system mounting plate to partition panel center. Battery frame,front. Brake power regulator to bracket. Battery frame to fire wall. Cooling pipe to frame side member. Hydraulic unit to bracket. Strut to stiffening,front central. Temperature sensor to front bumper.
Mercedes-Benz Engine hood,front,behind radiator grille shell 210 mm. Engine hood,central outside part 1500mm. Used without air conditioner. Between central part and the rear of engine hood 1500mm. Bottom covering 430 mm.
Mercedes-Benz CONDENSER TO STAY
Diameter: 4,8mm
Thread code letter: F. Seal to engine hood bracket,front
diameter: 4,8mm
thread code letter: f. VOLTAGE TRANSFORMER
Diameter: 4,8mm
Thread code letter: F. Temperature sensor to front bumper
diameter: 4,8mm
thread code letter: f. CONSOLE
Diameter: 4,8mm
Thread code letter: F. COVER TO HEIGHT ADJUSTER, LEFT
Diameter: 4,8mm
Thread code letter: F. BRACKET MOUNTING
Diameter: 4,8mm
Thread code letter: F.