Electronic-Hydraulic Control Unit for 2012 Mercedes-Benz SLK 250
Ctrr. Unit, Electrohyd
Validity: This part is valid if at least one of the following applies.
- With y-plate (after 2013-08-01) and vgs D4-0, D3 pattern (after 2013-03-04).
Ctrr. Unit, Electrohyd
Validity: This part is valid if at least one of the following applies.
- With u valve body assembly with vgs 3 (after 2008-09-10).
Ctrr. Unit, Electrohyd
Validity: This part is valid if at least one of the following applies.
- With s-valve body assembly with vgs 3 (after 2007-05-25) and reduced-friction (after 2009-03-26).
Ctrr. Unit, Electrohyd
Validity: This part is valid if at least one of the following applies.
- With s-valve body assembly with vgs 3 (after 2007-05-25). without reduced-friction (after 2009-03-26).
- With transmission code version 04 (after 2001-08-28).
Ctrr. Unit, Electrohyd
Validity: This part is valid if at least one of the following applies.
- With p-shift plate with VGS2 (after 2006-03-22).
Ctrr. Unit, Electrohyd
Validity: This part is valid if at least one of the following applies.
- With o-shift plate with VGS2 (after 2006-03-22).
Ctrr. Unit, Electrohyd
Validity: This part is valid if at least one of the following applies. - With transmission code version 06 (after 2001-08-28) or transmission code version 01 (after 2001-08-28). without j-valve body assembly vgs 1 (550 nm) (after 2004-07-05), j-valve body ...
Ctrr. Unit, Electrohyd
Validity: This part is valid if at least one of the following applies.
- With r-valve body assembly with vgs 3 (after 2007-05-25). without reduced-friction (after 2009-03-26).
- With V8 diesel engine OM629 (after 2003-04-11).
Ctrr. Unit, Electrohyd
Validity: This part is valid if at least one of the following applies. - With transmission code version 02 (after 2001-08-28). without j-valve body assembly vgs 2 (550 nm) (after 2004-10-08), k valve body assembly with vgs 2 (700 nm) (after 2004-10-08), m- ...
Ctrr. Unit, Electrohyd
Validity: This part is valid if at least one of the following applies.
- With u-valve body assembly with vgs 4-0 (after 2009-10-28).
Ctrr. Unit, Electrohyd
Only valid for model series 907. Identify transmission object number from data card to a 463 270 68 00. Validity: This part is valid if at least one of the following applies. - With transmission software retrofit (after 2009-10-07). - With transmission co ...
Ctrr. Unit, Electrohyd
Validity: This part is valid if at least one of the following applies.
- With u-valve body assembly with vgs 4-0 (after 2009-10-28) and das 3 (after 2010-09-23).
Ctrr. Unit, Electrohyd
Identify transmission object number from data card to a 463 270 61 00.
Validity: This part is valid if at least one of the following applies.
- With transmission software retrofit (after 2009-10-07) and das 3 (after 2010-09-23).
- With transmission code version 05 (after 2001-08-28).
Ctrr. Unit, Electrohyd
Identify transmission object number from data card to a 463 270 17 00. a 463 270 55 00.
Validity: This part is valid if at least one of the following applies.
- With t valve body assembly with vgs 3 (after 2008-09-10).
- With transmission code version 05 (after 2001-08-28).
Ctrr. Unit, Electrohyd
Validity: This part is valid if at least one of the following applies.
- With r-valve body assembly with vgs 3 (after 2007-05-25) and reduced-friction (after 2009-03-26).
Ctrr. Unit, Electrohyd
Validity: This part is valid if at least one of the following applies.
- With k valve body assembly with vgs 2 (700 nm) (after 2004-10-08). without V8 diesel engine OM629 (after 2003-04-11).
Combi-Cylinder Screw
Electrical system set to shift plate. M6x23.
Electrical control unit to valve body, bottom. M6x22. Door catch to door right. Door strap at rear door, left.
Validity: This part is valid if at least one of the following applies.
- Without inv special protection version (after 2012-10-05).
Rs Ctrr. Unit, Elec. Hyd
Validity: This part is valid if at least one of the following applies.
- Without y-plate (after 2013-08-01).
- With transmission code version 01 (after 2001-08-28), transmission code version 02 (after 2001-08-28), transmission code version 04 (after 2001-08-28), transmission code version 05 (after 2001-08-28), or transmission code version 32 (after 2005-05-30).
Rs Ctrr. Unit, Elec. Hyd
Identify transmission object number from data card to a 463 270 68 00. Validity: This part is valid if at least one of the following applies. - With u-valve body assembly with vgs 4-0 (after 2009-10-28). without y-plate (after 2013-08-01). - With transmis ...
Rs Ctrr. Unit, Elec. Hyd
Identify transmission object number from data card to a 463 270 61 00. Identify transmission object number from data card to a 463 270 63 00. Validity: This part is valid if at least one of the following applies. - With (i-valve body assembly with VGS4 an ...
Slider housing to transmission housing. M6x33. Electronic gas actuator to intake manifold to a 159 140 05 01.
Transmission control module N15/11. 6-pin LKS1.5. New automatic transmission 2 control unit N15/11. 6-pin LKS1.5. Automatic transmission ST_A62/2. 6-pin LKS1.5. Engine control module. 6-pin LKS1.5. Control unit nat N15/11. 6-pin LKS1.5.
Validity: This part is valid if at least one of the following applies.
- With automatic transmission 7-speed (after 2003-05-21).
- With automatic transmission 7G-tronic.
- With series 164 (after 2004-03-17).
(valve unit) "nag". 0.75-1.0 mm2 lks1.5. St_a62. 0.75-1.0 mm2 lks1.5. X22/31_b. 0.75-1.0 mm2 lks1.5. 0.8mm. 0.75-1.0 mm2 lks1.5. To 001 540 99 81. 0.75-1.0 mm2 lks1.5. With single-wire seal ST_N15/11.1. 0.75-1.0 MM2 LKS1.5.
Validity: This part is valid if at least one of the following applies.
- With sprintshift (automated gearshift) (after 2004-01-01) and different vw packages.
- With automatic transmission 7G-tronic.
Validity: This part is valid if at least one of the following applies. - With (engine om 646, DE22 la, 110KW (150 ps) 3800 rpm or engine om 646 de 22 la 95 kw 3800/rpm) and euro 4 engine variant. - With (((engine, low-emission epa 10/carb (after 2009-01-01 ...